(I have even been reading the electric meters and right now my hubby has had to reset the compressor by turning the thermostat off then back on a few minutes later and that seems to reset and the geo then works fine--hardly hear it running. BUT, by far this is a temporary fix until next Monday by the geo people.
MarkECIN, If I understand correctly what you are describing I would caution you about continuous or repeated resets. Unless your contractor has told you otherwise and you are sure they will assume any liability. It's not a good idea unless you understand exactly why the system is shutting down. I would turn the strips back on. Talk to your contractor and get them out sooner if possible.
