Hey guys, I am building a new dock in existing water. I was wondering what your ideas were for placing posts in the water. I am only going to be dealing with 2-3 foot of water and I have a tractor with an auger to dig my holes. The ground is pretty hard clay after the one foot of muck and does also contain gravel. My question is , what is the best way to anchor in the posts? I thought of using quickcrete ,but I was unsure of how to do it when the holes will be in the water. I also thought about just adding gravel and tamping it down. I have done the gravel thing with 20ft telephone poles and it held them up. The very front posts are the only ones I have to worry about dealing with water as my pond level is down enough I can easily concrete the others in. It is going to be around 16 x 25 ft. Any advice would be appreciated. Thank you, John
