|
Forums36
Topics41,074
Posts559,245
Members18,572
|
Most Online3,612 Jan 10th, 2023
|
|
12 members (Augie, Boondoggle, JoeDK, Tinylake, Dave Davidson1, ewest, FireIsHot, Mainahs70, Chadsnider, FishinRod, JoshMI, Sunil),
721
guests, and
489
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
Joined: Dec 2006
Posts: 342
Lunker
|
OP
Lunker
Joined: Dec 2006
Posts: 342 |
Not sure that we are talking about the same thing here...Hootens is making the corner brackets as specked out on the website for $45 each. I priced the sheet steel and the steel alone is nearly that. These brackets are 32" x 20" 3/16th thick steel bent in the middle to a 90% angle and then 8 holes drilled in them and a 2" x 20" piece of pipe welded to the corner. These things are extremely stout. If you shop I think you will find this to be a great deal.
"Our Life is frittered away by detail. Simplify, Simplify" -Henry David Thoreau -
|
|
|
Moderated by Bill Cody, Bruce Condello, catmandoo, Chris Steelman, Dave Davidson1, esshup, ewest, FireIsHot, Omaha, Sunil, teehjaeh57
There are no members with birthdays on this day. |
|
|
|
|