|
|
|
Forums36
Topics42,115
Posts571,695
Members19,116
| |
Most Online45,564 03:05 AM
|
|
|
|
Joined: Mar 2004
Posts: 10
Member
|
|
Member
Joined: Mar 2004
Posts: 10 |
Long time reader first time poster. I was wanting to know what the best water temp. is for using copper sulfate. I was told that the timing could be tricky so you don't hurt the bluegill fry and/or the bass eggs.
|
|
|
|
|
Joined: Apr 2002
Posts: 106
Lunker
|
|
Lunker
Joined: Apr 2002
Posts: 106 |
D. Miller. According to most algae can be treated when water temps approach the 60's. Algae is usually a battle throughout the year but the sooner you treat it the easier it'll be to contain the rest of the year. If you're going to apply early in the year you'll probably want to wait for a couple of consecutive good days with air temps in the mid 60's and sunny with not much wind. This way the chemical will stay in contact with the algae and will run it's course in the algae while it's growing at better rates. From what I understand at the recommended rates the chemicals shouldn't hurt the eggs or fry however it wouldn't hurt to avoid them. Around North Ohio I'd guess the bass would spawn around the middle of may and the bluegill will start their first bout of spawning somewhere around then also. I believe around water temps of 60-65 degrees is when you'll start noticing some spawning.
|
|
|
Moderated by Bill Cody, Bruce Condello, catmandoo, Chris Steelman, Dave Davidson1, esshup, ewest, FireIsHot, Omaha, Sunil, teehjaeh57
|
|
|
|