|
Forums36
Topics42,113
Posts571,682
Members19,115
| |
Most Online23,413 Yesterday at 08:18 AM
|
|
|
2 members (AbqBrian, Pond Star),
21,669
guests, and
134
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
Joined: Feb 2009
Posts: 941
Lunker
|
|
Lunker
Joined: Feb 2009
Posts: 941 |
Had an older gas grill that I just replaced the burner on. After using it twice I came out to find the flexible tubing that connects the burner to the gas (though the control knobs) all chewed up and all over the deck. Being a slow learner I buy another replacement burning and installed it. Only to find the same thing a couple of days later after using it once. So I have two brand new burners used a total of 3 times and no way to connect them. After installing the second one I turned on motion detection on my surveillance camera but did not see what got to the tubing. I thinking squirrels but not sure. Big question is how to work around this? Any way to just purchase the tubing with buying the burner? Of course I would have to protect it in some way. Or better yet finding a more solid tube that maybe wouldn't attract what ever is eating it.
|
|
|
|
|
Joined: May 2012
Posts: 43
|
|
Joined: May 2012
Posts: 43 |
Pretty sure squirrels. same thing just happened to me, I wonder if they make a flexible Stainless line? Sounds like a pile of peanuts and a pellet gun is in order.
|
|
|
|
|
Joined: Jan 2009
Posts: 29,788 Likes: 1295
Moderator Ambassador Field Correspondent  Lunker
|
|
Moderator Ambassador Field Correspondent  Lunker
Joined: Jan 2009
Posts: 29,788 Likes: 1295 |
Ditto on the squirrels. Can you enclose under the BBQ with chicken wire or hardware cloth?
Put a rat trap baited with peanut butter under the BBQ where they can get to it. If it doesn't kill them, it'll give them a sore nose! Wrap some cotton string around the trigger and tie it tight. Mash the peanut butter into the string. They might be able to get the peanut butter off of the metal trigger without setting off the trap, but if they try to chew the string it'll trip the trap.
|
|
|
|
|
Joined: Feb 2009
Posts: 941
Lunker
|
|
Lunker
Joined: Feb 2009
Posts: 941 |
Have to find some time to rig this up. trying to finish some tiling of the master shower today but that is going real slow.
|
|
|
|
|
Joined: Dec 2009
Posts: 6,692
Hall of Fame 2015 Lunker
|
|
Hall of Fame 2015 Lunker
Joined: Dec 2009
Posts: 6,692 |
You can get stainless braided hose for this. Had a mouse chew thru the hose on my Buddy propane heater. That thing works really good!, but need a new hose. I have about 20 or so feet of braided left over from another project. Fittings should not be a problem. Last Monday I went up to the property. Walked by the generator and a hole was chewed thru the plastic gas tank. I am thinking WTF  Chipmunks or Squirrels, both are quite prolific in the area, and not enough predators. I need to get a pet Bobcat or two It's a thermoplastic so I can weld a patch over. Glad you brought this subject up! 
|
|
|
|
|
Joined: Feb 2009
Posts: 941
Lunker
|
|
Lunker
Joined: Feb 2009
Posts: 941 |
I was thinking of placing a couple of claymors under the grill but that way be just a little over the top.
|
|
|
|
|
Joined: Feb 2011
Posts: 102
|
|
Joined: Feb 2011
Posts: 102 |
I was thinking of placing a couple of claymors under the grill but that way be just a little over the top. Nah 
Drought of 2012
-God gives you situations so that you can benefit from them.
|
|
|
Moderated by Bill Cody, Bruce Condello, catmandoo, Chris Steelman, Dave Davidson1, esshup, ewest, FireIsHot, Omaha, Sunil, teehjaeh57
|
|