I got a few pallet structures done today. The bottom of the stacks might be in a bit deep once the pond fills, but it will be easy enough to add more to the top at a later date. The pallets are screwed together, and then wired to the t-posts.
I used up the whole lot that I dragged home from work awhile back. I'll keep my eye on the dumpster spot and scrounge a few more as they become available. Haven't decided if I'm going to put a couple more of them in this pond, but I'll need them for when the forage pond is done. I really like this 3'x3' size. They're easy to handle.
The water was quite turbid after last weekend's rainfall. It has cleared up quite a bit since then. Jury is still out on whether or not I'll need to do a floc treatment to settle out the bentonite, but I've got the feeling that I will.
1/6/19 I put one in the upper neck.
1/6/19 One about 30 yards to the east next to the overflow.
1/6/19 And one tied to the fence on the west side. Didn't see any reason to use additional posts here.
Last edited by Augie; 04/19/2008:10 AM. Reason: fixing the pics