Well, I did not have to work in horrible weather to get it done over the weekend, just chilly, windy & cloudy. It floats well. I may have mentioned that I cheated the float manufactures suggested weight per float on two sections. These sections are 12 feet by 4 feet rather than the suggested 10x4, 3 floats per and the added weight of the triangular seats added even more cheating, but the wood is 4 to 5 inches above the water. When I (at 185 pounds) stand on the outer most corners the wood just touches the water so I am calling it a success. I did add 13 gallons of water to each of the two barrels on the gangway, they really floated high. They were holding the second gangway up causing the very end to be dipping down. The addition of the water helped bring the very end up more so than level which helped with regard to the wood touching the water with my weight on it. Here are a few shots...
