Forums36
Topics40,963
Posts557,995
Members18,504
|
Most Online3,612 Jan 10th, 2023
|
|
|
Joined: Jun 2012
Posts: 2,058 Likes: 7
|
OP
Joined: Jun 2012
Posts: 2,058 Likes: 7 |
I am going to get a pump rated for this application. I am going to make a water lift with it for a grow out tank for some perch.
I am looking at a 12 foot round tank about 30-36"s deep. Not sure how many fish we can raise in it but it will be a start. I will be using a swirl filter for the solids and IBC tote media filter for this one 12 foot tank.
I would like to arrange the single 9" disk in the middle of the 12 foot tank inside a 5 gallon bucket then reduce the bucket down to 4". Mesh on the bucket to keep the fish from heading up. Then into a 45 gallon swirl filter then to the IBC media then back into the 12 foot tank on the side to make a swirl motion in the 12 foot tank too. This will pull all the solid waste to the disk and out is the thoughts.
Cheers Don.
|
|
|
Moderated by Bill Cody, Bruce Condello, catmandoo, Chris Steelman, Dave Davidson1, esshup, ewest, FireIsHot, Omaha, Sunil, teehjaeh57
|
|