Thanks for the advice guys. Appreciate it. I done a test run of treating 1/3 of the pond tonight on the deep side where the wind had the film pushed up. I used cutrine liquid at .6 ppm for the area and depth I covered. We will see what happens. I have a couple questions if you all could.
Bill, you mentioned a nutrient imbalance. Could you explain what your meaning by that.
Essup, on applying cutrine plus liquid, if I try to treat 1/3 at a time to .6 ppm is that even possible other than surface contact? If my math is right I'm turning my pond a little better than 6 times a day with my diffuser. So in theory if I try to do it in 1/3 at a time at .6 ppm in 4 hours I have it diluted back below .2 ppm throughout the whole pond. So I'm thinking I would have to treat my whole volume of water at once to get to .6ppm. What is your take on this?
Thanks
I have 1 1/2 acre feet of water

Last edited by Beretta; 06/30/16 07:49 PM.