Pond Boss Forums INTRO Questions & Observations New member starting a new project, advise needed.

Welcome to the forum.

Fence the pond to keep the cattle out, and put in an above ground tank for them to get water from.

When the pond is constructed, have them use a sheepsfoot roller to compact the whole pond bottom. A tracked vehicle (dozer or excavator) typically won't create enough compaction unless you have clay that you can make pots out of.

Slopes should be no steeper than 3:1, less if you plan on driving anything on them to mow.

Usual procedure is to have the sheepsfoot compact everything from bottom to top until it "walks out" of the soil, add a fresh 6"-8" layer of clay, repeat. Do that a minimum of 3 times to seal the pond. If the builder doesn't want to do that, ask them if they will come back on their dime and get it to hold water if it doesn't, and get it in writing.

Try and minimize the runoff from the cattle pasture to the pond. It will bring in nutrients to the pond that will grow a lot of underwater plants or algae.

Check with your counties NRCS agent on how deep the pond should be, and if any water control devices need to be added (emergency overflow, etc.)

Once you find out that info from the NRCS, talk to the pond digger and make sure he agrees to that info. If the NRCS says that the pond should be 12' deep, ask them what % of the pond should be that deep. Remember that they are talking from the current ground level down, not measured down from the top of any soil that comes out of the pond.

The dirt that is left for removal later, have it far enough from the pond that it won't wash into the pond, and determine where the stuff that is sifted out will end up.