All good points Nate, and I appreciate you taking time out of your busy schedule to respond. I can't speak for RC, but I do tend to practice some of what you suggest in your post. I feed all of my ponds by hand, as I believe it gives me the chance to adjust feed rates based on what the fish want....if they don't want to eat that particular evening, then I cut down on the feed. If they are especially aggressive, then I feed more. That kind of flexibility is just not available in a mechanical feeder.

I also feed from the entire perimeter of the HBG pond, and probably half the perimeter of the other three. Again, this is just to try and make sure I get feed in front of any fish that wants to eat. I've always done it this way, it seems to produce good results. I feed every evening during feeding season. Perhaps I should cut back.


"Forget pounds and ounces, I'm figuring displacement!"

If we accept that: MBG(+)FGSF(=)HBG(F1)
And we surmise that: BG(>)HBG(F1) while GSF(<)HBG(F1)
Would it hold true that: HBG(F1)(+)AM500(x)q.d.(=)1.5lbGRWT?
PB answer: It depends.