|
Forums36
Topics40,990
Posts558,253
Members18,515
|
Most Online3,612 Jan 10th, 2023
|
|
9 members (esshup, FishinRod, Fishingadventure, KiwiGuy, teehjaeh57, phinfan, Boondoggle, x101airborne, lafarmpondguy),
814
guests, and
232
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
Joined: Apr 2002
Posts: 15,154 Likes: 493
Moderator Ambassador Field Correspondent Lunker
|
Moderator Ambassador Field Correspondent Lunker
Joined: Apr 2002
Posts: 15,154 Likes: 493 |
With all 3 valves closed your 0523 should 'peg' the 30psi gauge and if it continues to run should shatter the vanes due to excessive pressure (>30psi). I would check the vanes for excessive wear and a rebuild kit is likely needed or you have an air leak somewhere but that is doubtful since you can only build 9psi at the manifold. Check the front end caps to make sure they are hand tight and O rings are not cracked allowing air to escape. Air can escape from loose end caps.
Last edited by Bill Cody; 06/27/11 10:00 AM.
aka Pond Doctor & Dr. Perca Read Pond Boss Magazine - America's Journal of Pond Management
|
|
|
Moderated by Bill Cody, Bruce Condello, catmandoo, Chris Steelman, Dave Davidson1, esshup, ewest, FireIsHot, Omaha, Sunil, teehjaeh57
|
|
|
My First
by FishinRod - 05/04/24 11:48 PM
|
|
|
|
|
|
|
|
|
|
|
|
|