Well, I would think that I already have enough suspended clay in the water to help things out. Visibility was like 5 inches when I started and that was all clay. I saw major floc/clumping while applying the product. Seems like if the product/DB-100 doesn't really get into the ground at the point of seepage, then it really wouldn't work long term.
I did something similar to the "y" fitting with my setup. I just drilled and taped the suction connector and inserted a 3/8 barb fitting which was the size suggested for a 3 inch pump. Ran a line to a valve and then into the DB-100 container.
Notes: Start the pump with the valve closed and then open it once the water is flowing. The product is real thick and flows pretty slow. Think I was going through about 4 gallons an hour with the valve wide open. Make sure you don't open the valve when no water is flowing. It will suck that stuff into the pump and stop it up. That is what happened to me. Took a while to get it re-primed.
