Pond Boss Magazine
http://www.pondboss.com/images/userfiles/image/20130301193901_6_150by50orangewhyshouldsubscribejpeg.jpg
Advertisment
Newest Members
Hillcrest, McClellanW, depber, beatrice32, AnglinAngie
16413 Registered Users
Forum Statistics
Forums36
Topics37,504
Posts510,938
Members16,414
Most Online3,583
Jan 15th, 2020
Top Posters(All Time)
esshup 24,269
ewest 20,111
Cecil Baird1 20,043
Bill Cody 13,209
Who's Online Now
8 registered members (anthropic, Bocomo, Wooman, Bobbss, Chris Steelman, Pat Williamson, snrub, SSF), 236 guests, and 153 spiders.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
What is the best fillet knife for cnbg #482160 11/04/17 11:02 AM
Joined: Sep 2014
Posts: 1,302
F
Flame Offline OP
OP Offline
F
Joined: Sep 2014
Posts: 1,302
Will finally start to eat some cnbg. What is the best method to clean and/or fillet 8 inch cnbg? Is a electric knife out of the question? I have one but don't even own a regular fillet knife of any brand, Any suggestions or advise for preparing such small fish? I can do lmb with no problem just don't want to waist meat on these little guys. Thanks


Dear Alcohol, We had a deal where you would make me funnier, smarter, and a better dancer... I saw the video... We need to talk.
Re: What is the best fillet knife for cnbg [Re: Flame] #482162 11/04/17 11:19 AM
Joined: Oct 2013
Posts: 5,634
S
snrub Online Content
Online Content
S
Joined: Oct 2013
Posts: 5,634
I'm not very good at filleting them but after a few hundred I'm getting better. Now it does not seem like such a chore after getting a little better at it.

In my case, we have such an abundance of BG I do not worry about wasting meat at all. Wife and I both fillet them by basically cutting around the rib cage and leaving the entire fish body and guts intact. Rather than cutting through the rib cage and cutting the rib bones out after the filleting process, we just cut around the ribs while getting the fillet out and leave the ribs and guts attached to the head and back bone. I do not even try to save the belly meat. Just cut across and take out what would be the tenderloin on an animal. End up with two small strips of fish stick meat.

I probably did not explain that very well. But where our LMB are not keeping up with thinning out enough BG, we have an abundance of 6-8" BG. Have about 40 out in the holding pen right now we will fillet tomorrow afternoon (likely to add to that number today). So we do not worry about loosing some meat around the rib bones or the belly.

Just the way we do it. I know some like to eat them whole with the bones. We tried that once and my wife just has no intention of doing anything that is not boneless. Far be it for me to be the one who argues with her.

Sorry, no suggestions on knives. We have one set of three that came in a case with a sharpener that I only use the smallest of the three knives and wife has a separate one. I think they all came from Wal-Mart so likely are not the best. Keeping them sharp with the sharpener seems to be the main key, then they work pretty well. My wife is pretty keen on having good knives as she does a lot in the kitchen. Some of her knives I know better than to ask what they cost knowing that it is better I do not know. But she seems to be happy with the fillet knives we use and they are not particularly "name brand" like her kitchen knives are as far as I can tell.

Last edited by snrub; 11/04/17 11:39 AM.

John

I subscribe to Pond Boss Magazine
Re: What is the best fillet knife for cnbg [Re: Flame] #482164 11/04/17 11:55 AM
Joined: Aug 2015
Posts: 227
T
ThePondDragon Offline
Offline
T
Joined: Aug 2015
Posts: 227
Personally I use an electric fillet knife and it works fine. Granted it's been a few years since I've filleted a BG but that will change next year with the pond! I cut through the ribs and cut them off but I'd agree with snrub that if I had 40 to fillet I would ignore it. Use what ever you want, try electric and try a normal knife, whatever you are more comfortable with you should use.


0.7 acre pond stocked October 2016, LMB, BG/SF, CC.
Re: What is the best fillet knife for cnbg [Re: Flame] #482170 11/04/17 02:52 PM
Joined: Oct 2014
Posts: 6,065
Bill D. Offline
Offline
Joined: Oct 2014
Posts: 6,065
FWIW I've used Rapala knives since I was old enough to clean a fish. Not expensive, flexible and hold an edge well. I have the 4, 7.5 and 9 inch so I can fillet the little guys all the way up to the big ones.



You'll never know what ya can catch unless you wet a line!
Re: What is the best fillet knife for cnbg [Re: Flame] #482172 11/04/17 03:24 PM
Joined: Jun 2008
Posts: 6,956
S
sprkplug Offline
Ambassador
Lunker
Offline
Ambassador
Lunker
S
Joined: Jun 2008
Posts: 6,956
I use a non-stainless Dexter Russell. Inexpensive, easy to sharpen. After trying many of the usual makes, this one is my go to.


"Forget pounds and ounces, I'm figuring displacement!"

If we accept that: MBG(+)FGSF(=)HBG(F1)
And we surmise that: BG(>)HBG(F1) while GSF(<)HBG(F1)
Would it hold true that: HBG(F1)(+)AM500(x)q.d.(=)1.5lbGRWT?
PB answer: It depends.
Re: What is the best fillet knife for cnbg [Re: sprkplug] #482173 11/04/17 04:16 PM
Joined: Jan 2009
Posts: 24,269
esshup Offline
Moderator
Ambassador
Field Correspondent
Lunker
Offline
Moderator
Ambassador
Field Correspondent
Lunker
Joined: Jan 2009
Posts: 24,269
After being shown how to fillet with an electric knife, that's the only way to go. Sort of going from riding a horse to the store vs. driving a car.....


www.hoosierpondpros.com


http://www.pondboss.com/subscribe.asp?c=4
3/4 to 1 1/4 ac pond LMB, SMB, PS, BG, RES, CC, YP, Bardello BG, (RBT & Blue Tilapia - seasonal).
Re: What is the best fillet knife for cnbg [Re: esshup] #482179 11/04/17 07:36 PM
Joined: Oct 2014
Posts: 6,065
Bill D. Offline
Offline
Joined: Oct 2014
Posts: 6,065
Originally Posted By: esshup
After being shown how to fillet with an electric knife, that's the only way to go. Sort of going from riding a horse to the store vs. driving a car.....


I would love to have a pro with an electric knife give me a lesson. I waste way too much meat when I use one.



You'll never know what ya can catch unless you wet a line!
Re: What is the best fillet knife for cnbg [Re: Flame] #482181 11/04/17 07:58 PM
Joined: Jun 2008
Posts: 6,956
S
sprkplug Offline
Ambassador
Lunker
Offline
Ambassador
Lunker
S
Joined: Jun 2008
Posts: 6,956
Electric is far quicker no doubt. To me however, cleaning fish is part of fishing. Its the conclusion to a successful outing, and while it may not be glamorous, I think its important. I find a satisfaction in doi ng the best job I can, simply. The way it was done a century ago.

I can shoot far and fast with an AR platform rifle. And while I enjoy doing so, there's still a simple, satisfying pleasure gained by working the lever on an 1873 that the black rifle cannot match. I suppose it comes down to preference.


"Forget pounds and ounces, I'm figuring displacement!"

If we accept that: MBG(+)FGSF(=)HBG(F1)
And we surmise that: BG(>)HBG(F1) while GSF(<)HBG(F1)
Would it hold true that: HBG(F1)(+)AM500(x)q.d.(=)1.5lbGRWT?
PB answer: It depends.
Re: What is the best fillet knife for cnbg [Re: Flame] #482184 11/04/17 09:45 PM
Joined: Jan 2011
Posts: 341
4
4CornersPuddle Offline
Offline
4
Joined: Jan 2011
Posts: 341
I'm right there with you SPRKPLUG. The fish I pull from my pond get filleted with one of my old Rapala 4" wooden handled slicers.
Last weekend I traveled to the deserts of Wyoming and took a right and a left of antelope with my handloads in my .45 Colt M92 SS Rossi lever gun.
I'm cutting and wrapping the speed goats right now. It's just part of the hunting in my book.

Re: What is the best fillet knife for cnbg [Re: Flame] #482189 11/05/17 04:39 AM
Joined: Feb 2013
Posts: 99
D
dale k Offline
Offline
D
Joined: Feb 2013
Posts: 99
I use the short Rapala. I do not clean over 15 at a time. I have never tried electric on BG

Re: What is the best fillet knife for cnbg [Re: Flame] #482194 11/05/17 09:59 AM
Joined: Sep 2014
Posts: 1,302
F
Flame Offline OP
OP Offline
F
Joined: Sep 2014
Posts: 1,302
Thank you everyone. I too have plenty of fish so a little waste would not hurt. Prob. would never have to clean more than 20 at a time and most of the time only about a dozen.I will practice with my electric but will go purchase a good fillet knife for backup. Does anyone clean,scale, and fry whole any more??


Dear Alcohol, We had a deal where you would make me funnier, smarter, and a better dancer... I saw the video... We need to talk.
Re: What is the best fillet knife for cnbg [Re: Flame] #482196 11/05/17 10:10 AM
Joined: Sep 2014
Posts: 3,117
T
TGW1 Offline
Offline
T
Joined: Sep 2014
Posts: 3,117
I do, I prefer it that way when eating bg. I will also do the same with up to a 10" crappie or red ear.

Last edited by TGW1; 11/05/17 10:11 AM.

Do not judge me by the politicians in my City, State or Federal Government.


Tracy
Re: What is the best fillet knife for cnbg [Re: Flame] #482197 11/05/17 10:38 AM
Joined: Jun 2008
Posts: 6,956
S
sprkplug Offline
Ambassador
Lunker
Offline
Ambassador
Lunker
S
Joined: Jun 2008
Posts: 6,956
My mother still prefers her bg prepared whole, and I will do so when cleaning fish for her. Growing up, it was the only way we ate fish at home.

Flame, I'm glad you're going to get a fixed blade knife also. I'm betting that most here would promote learning to drive a manual trans vehicle, even when an automatic was the vehicle of choice. Like mastering manual shifting, becoming proficient with a non- electron knife is a valuable skill to have.


"Forget pounds and ounces, I'm figuring displacement!"

If we accept that: MBG(+)FGSF(=)HBG(F1)
And we surmise that: BG(>)HBG(F1) while GSF(<)HBG(F1)
Would it hold true that: HBG(F1)(+)AM500(x)q.d.(=)1.5lbGRWT?
PB answer: It depends.
Re: What is the best fillet knife for cnbg [Re: sprkplug] #482202 11/05/17 11:09 AM
Joined: Jan 2009
Posts: 24,269
esshup Offline
Moderator
Ambassador
Field Correspondent
Lunker
Offline
Moderator
Ambassador
Field Correspondent
Lunker
Joined: Jan 2009
Posts: 24,269
I have close to 1/2 dzn Rapala fillet knives. Both short and long, wood and plastic handles. All work great. 2 of the wood handled ones I bought when I was a kid, One I bought at a flea market for $2, one I found along a river and I forget where I got the others. The finish is about worn off of the wood handles on the 2 oldest ones.


www.hoosierpondpros.com


http://www.pondboss.com/subscribe.asp?c=4
3/4 to 1 1/4 ac pond LMB, SMB, PS, BG, RES, CC, YP, Bardello BG, (RBT & Blue Tilapia - seasonal).
Re: What is the best fillet knife for cnbg [Re: Flame] #482212 11/05/17 02:59 PM
Joined: Aug 2016
Posts: 401
M
Matzilla Offline
Offline
M
Joined: Aug 2016
Posts: 401
I use the Rapala too...but I fillet backwards compared to most people. With bluegills (and most other fish) I start at the tail and cut toward the head, follow the top of the ribs, pull the meat toward the bottom of the fish and just let the tip of the knife bounce off the ribs. It works just as well and quickly as using an electric knife and doing the usual cutting of the ribs then removing bones - but without all of the hassle.


Mat Peirce
1.25 acre southeast Iowa pond
LMB, BG, YP, WE, HSB, RES, BCP
Re: What is the best fillet knife for cnbg [Re: Flame] #482222 11/05/17 07:55 PM
Joined: May 2014
Posts: 2,132
A
anthropic Online Content
Online Content
A
Joined: May 2014
Posts: 2,132
Just don't bury the remains in your back yard. If neighborhood dogs sniff it out, very bad things can happen.

VERY BAD. sick

Learned that when I was a kid...

Last edited by anthropic; 11/05/17 07:59 PM.

8ac E Tx, full 3/16. CNBG, RES, FHM 10/15; TP 5/16; FLMB 6/16. 100 12" NLMB & 1k GSH 10/17. 150# TP & 70 HSB 5/18. 1k PK 11/18. 100# TP 4/19, 200# RBT 12/19




Re: What is the best fillet knife for cnbg [Re: Flame] #482231 11/05/17 10:14 PM
Joined: Oct 2013
Posts: 5,634
S
snrub Online Content
Online Content
S
Joined: Oct 2013
Posts: 5,634
Here are the knives we use. Best? Doubtful but I really do not know as we have used nothing else.

I could not find a name anywhere on the one my wife uses which is the one with the black handle and the individual case. She likes it the best because it is more flexible than the KVD which are the ones in the three knife kit with the sharpener. I use the small KVD fillet knife. I suppose we might use the others some day if we ever clean larger fish, but about the biggest thing we clean to date is 3# CC and we clean a lot more BG than CC so the small knife is plenty big.

The other pictures are just some of the cleaning we did today. Don't have a final count on the fish (wife will do that when she counts the fillets as she freezes them) but it was at least a 5 gallon bucket full of BG with about 10% HBG and a few GSF. Ended up with right at 10# of filleted boneless meat.

Carolynn works where she is standing and I work off the end where the green hose and stool is in the picture.

The description is wrong on the picture as it should read the "near end" as I am standing where I fillet when I took the picture. In the last picture if you look at the end of the dock on the right hand side, there is a cage floating in the water. That is where we keep the fish till ready to clean a big bunch at once like we did today.

Attached Files
20171105_131416.jpg (96.41 KB, 222 downloads)
The knives we use
20171105_131455.jpg (138.13 KB, 227 downloads)
the fish we worked on today
20171105_131440.jpg (99.38 KB, 224 downloads)
Carolynn at the fish cleaning table. I work off the far end and we both clean at once
20171105_131508.jpg (117.04 KB, 219 downloads)
20171105_131534.jpg (63.34 KB, 222 downloads)
Last edited by snrub; 11/05/17 10:30 PM.

John

I subscribe to Pond Boss Magazine
Re: What is the best fillet knife for cnbg [Re: Flame] #482232 11/05/17 10:40 PM
Joined: Jan 2006
Posts: 14,243
D
Dave Davidson1 Offline
Moderator
Lunker
Offline
Moderator
Lunker
D
Joined: Jan 2006
Posts: 14,243
I am a HUGE fan of high carbon, non stainless, for any cutting knife.


It's not about the fish. It's about the pond. Take care of the pond and the fish will be fine. PB subscriber since before it was in color.

Without a sense of urgency, Nothing ever gets done.

Boy, if I say "sic em", you'd better look for something to bite. Sam Shelley Rancher and Farmer Muleshoe Texas 1892-1985 RIP
Re: What is the best fillet knife for cnbg [Re: Flame] #517026 02/19/20 12:12 AM
Joined: Feb 2020
Posts: 4
V
vseprosto90211 Offline
Offline
V
Joined: Feb 2020
Posts: 4
I love my American Angler PRO electric fillet knife. Bought it as a replacement for my old Rapala electric fillet knife and now use it for everything. I hunted all over, read a lot of reviews on different forums and was advised to check over this guide https://pickadvisor.org/best-electric-fillet-knives/ Maybe, it would be helpful for someone as well.
What I like in American Angler is the selection of blades and a comfortable handing. So, maybe you would check over it as well.

Last edited by vseprosto90211; 02/19/20 12:13 AM.

Today's Birthdays
blair5002
Recent Posts
Never been much for fishing, but maybe someday....
by anthropic - 04/01/20 12:39 AM
North Texas Optimal fish food group buy
by Chris Steelman - 03/31/20 11:53 PM
Snags are our friend...
by anthropic - 03/31/20 11:22 PM
Spring fed Trout pond project
by anthropic - 03/31/20 11:08 PM
Pond Mission Impossible?
by PerryNZ - 03/31/20 11:04 PM
For southern ponds, why not RES & LMB?
by anthropic - 03/31/20 11:03 PM
New member, and Pond Owner from Ohio
by Theo Gallus - 03/31/20 09:37 PM
Types of crayfish
by RStringer - 03/31/20 08:59 PM
Lime Screenings
by Bobbss - 03/31/20 08:57 PM
Corona-virus & Our Ponds
by RStringer - 03/31/20 08:34 PM
Newly Uploaded Images
Peppers pond
Getting photos on this forum is a PITA!
Retreat
I Subscribe Permanent Link
Need Plants Identified - Texas Pond - Lily Pad ...
Personal Record BGxRES

� 2014 POND BOSS INC. all rights reserved USA and Worldwide

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 5.6.40-0+deb8u10 Page Time: 0.010s Queries: 15 (0.003s) Memory: 1.1118 MB (Peak: 1.3641 MB) Data Comp: Zlib in php.ini Server Time: 2020-04-01 04:45:25 UTC
Valid HTML 5 and Valid CSS