Pond Boss Magazine
http://www.pondboss.com/images/userfiles/image/20130301193901_6_150by50orangewhyshouldsubscribejpeg.jpg
Advertisment
Newest Members
LaBassmaster, Andrew Epperson, Steve Grasberger, sriley, munsterlander
16216 Registered Users
Forum Stats
16217 Members
36 Forums
37122 Topics
505192 Posts

Max Online: 2022 @ 10/09/19 11:25 PM
Top Posters
esshup 24033
Cecil Baird1 20043
ewest 19971
Dave Davidson1 14046
Bill Cody 12949
Who's Online
1 registered (Homewaters), 760 Guests and 142 Spiders online.
Key: Admin, Global Mod, Mod
Topic Options
#508538 - 07/06/19 10:09 AM Circulation from well pump?
SmithMilitia Offline


Registered: 04/17/19
Posts: 9
Loc: ALABAMA
I have a 1.5 acre pond that is feed by a 180' deep well 1.5 hp pump that flows about 30-40gpm it comes in on one end of the pond at about water level. The pond looks very clean and fish are very healthy but I would like to get more circulation as the water seems really warm on the top and is probably not near the bottom. I just finally got the well pump replaced yesterday and am topping off the pond the about 2-3 feet it was low. It was filled a couple months ago just from rain but this will keep it full all the time and keep fresh water coming in. Anyway to my question do you think if I make the 2 inch line taper down or add a valve to up the pressure or add a spray bar etc I can get the circulation of the water up without adding aerators? Have any of you done this or maybe added a line to make a large sprayer?

Thanks in advance

Top
#508545 - 07/06/19 06:17 PM Re: Circulation from well pump? [Re: SmithMilitia]
Snipe Offline


Registered: 10/26/18
Posts: 634
Loc: NW Kansas
I have a similar situation at my pond. I added a venturi to my main line-also 2"- to suck a bit of air into the low DO water, but I don't want my temps equal top to bottom. Mine is about 11.5' at the deepest, full-pool and my main line comes in and is anchored in 7' coming straight up about 1' off of bottom. I can also run 120gpm open flow and it's quite a boil.
I still decided it best to buy an aerator and run night cycles only in the heat. I think it's helped my water quality substantially.


Edited by Snipe (07/06/19 06:18 PM)
_________________________
I Subscribe!

Top
#508964 - 07/16/19 10:41 AM Re: Circulation from well pump? [Re: Snipe]
Kris B Offline


Registered: 04/14/19
Posts: 39
Loc: Lafayette, LA
How did you setup your venturi into the well feed line, just a tee with a vertical air draw?
_________________________
Kris

I subscribe to Pond Boss Magazine

Top
#509013 - 07/17/19 08:49 AM Re: Circulation from well pump? [Re: SmithMilitia]
TGW1 Offline


Registered: 09/19/14
Posts: 2884
Loc: Harrison Co. Texas
I have a 2" line from my water well that produces around 50 gpm and I drilled a hole in the top side of the line and then set a half inch six inch long pipe into the hole to where it will suck air into the water line and feed the water. You can actually see the difference in the water/air mixture as it comes out of the water line simply by putting my finger over the small piece of pipe.
_________________________
Do not judge me by the politicians in my City, State or Federal Government.


Tracy

Top
#509045 - 07/17/19 10:45 PM Re: Circulation from well pump? [Re: TGW1]
Kris B Offline


Registered: 04/14/19
Posts: 39
Loc: Lafayette, LA
Great, thanks! Hopefully my pond will be refurbished and filing up in the next month or two, and I'd like to suck a little oxygen in as I fill it up!
_________________________
Kris

I subscribe to Pond Boss Magazine

Top
#509048 - 07/17/19 11:20 PM Re: Circulation from well pump? [Re: SmithMilitia]
Snipe Offline


Registered: 10/26/18
Posts: 634
Loc: NW Kansas
Kris, I meant to take a pic of mine today but I forgot while there.
I tried several combinations of sizes and I ended up using a reducer from 2" down to 3/4", 6" of pipe then back to 2". At the down stream end of 3/4" I drilled a hole for a carbon arrow shaft sticking straight up, angled the end and glued in place so the shaft was centered in the flow. You can hear it sucking air 100yrds away. Creates a hell of a boil..
_________________________
I Subscribe!

Top
#509413 - 07/26/19 01:04 AM Re: Circulation from well pump? [Re: Snipe]
Kris B Offline


Registered: 04/14/19
Posts: 39
Loc: Lafayette, LA
Wow! Sounds like it's doing the job, but can't say I want to be hearing the sucking sound when it's running! I'm planning to put the well pump on a float switch... I'll have to think more about that one. Thanks again for the input!
_________________________
Kris

I subscribe to Pond Boss Magazine

Top

Today's Birthdays
Brad B., JAWGADAWG
Recent Posts
Only fish necessary for pond health
by John Fitzgerald
Yesterday at 11:29 PM
Walleye
by Snipe
Yesterday at 11:00 PM
New Pond in NW KS. (The end of..)
by Snipe
Yesterday at 10:47 PM
F1 Bass in Southern Illinois?
by Andrew Epperson
Yesterday at 09:24 PM
Happy Birthday Catmandoo!
by Bill Cody
Yesterday at 08:21 PM
A Pond Log by QA
by jpsdad
Yesterday at 08:19 PM
Yellow perch eggs algae.
by Bill Cody
Yesterday at 08:16 PM
Anchor chains for rafts/toys
by Bill D.
Yesterday at 07:46 PM
North Texas 1/2 Acre Existing Pond - Few Fish
by DannyMac
Yesterday at 06:45 PM
Do Fry Survive Winter?
by ewest
Yesterday at 05:13 PM
Newly Uploaded Images
Personal Record BGxRES
Harry's Pond
pond view
Fishing Colorado...finally
Releasing a quick snack
Tadpoles

2014 POND BOSS INC. all rights reserved USA and Worldwide