Pond Boss Magazine
https://www.pondboss.com/images/userfiles/image/20130301193901_6_150by50orangewhyshouldsubscribejpeg.jpg
Advertisment
Newest Members
Shotgun01, Dan H, Stipker, LunkerHunt23, Jeanjules
18,451 Registered Users
Forum Statistics
Forums36
Topics40,900
Posts557,095
Members18,452
Most Online3,612
Jan 10th, 2023
Top Posters
esshup 28,415
ewest 21,475
Cecil Baird1 20,043
Bill Cody 15,110
Who's Online Now
15 members (Sunil, jpsdad, azteca, esshup, BillyE, H20fwler, FishinRod, Augie, PRCS, LeighAnn, bstone261, LANGSTER, dg84s, ewest, Fishingadventure), 694 guests, and 280 robots.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
#486689 02/28/18 08:26 PM
Joined: Feb 2018
Posts: 23
F
OP Offline
F
Joined: Feb 2018
Posts: 23
So I just purchased an easy pro 1/2 HP unit. Fired it up and all seems to be working but I noticed the pump/compressor is really running warm, like I wouldn't want to lay my hand on it warm, is that normal? It has a fan in the cabinet and its running but the pump/compressor is still hot.
Question two is my pressure gauge is reading 0 psi... Diffusers are working and it is really rolling the water, but still the gauge says 0. It is run from the compressor about 500' to the pond in 1" pvc pipe if that makes a difference. Any advice would be greatly appreciated!
Thanks

Joined: Apr 2002
Posts: 15,110
Likes: 478
B
Moderator
Ambassador
Field Correspondent
Lunker
Offline
Moderator
Ambassador
Field Correspondent
Lunker
B
Joined: Apr 2002
Posts: 15,110
Likes: 478
Compressors operate hot after several hours running and is normal which is a big reason why it has a fan in the cabinet. Pressure gauge should not read 0 when the diffusers are operating. Gauge should read at least 1/2 the depth of the deepest diffuser. Possibly the gauge is bad?

To check if the gauge is working properly,,, disconnect the airline/s from the pump. If there are two airlines disconnect both. Close one valve and the gradually slowly put your finger over the air gushing out the open outlet. As your finger gets close to stopping all the air escaping or VERY briefly stops the air flowing out the gauge should show the increased air pressure that you are creating. If the needle does not show the pressure increased due to your finger restricting the air flow the gauge is bad and tell the company to ship you an new gauge for free.


aka Pond Doctor & Dr. Perca Read Pond Boss Magazine -
America's Journal of Pond Management

Link Copied to Clipboard
Today's Birthdays
Bob Lusk, GaryK, GrizzFan, PhotographerDave
Recent Posts
Relative weight charts in Excel ? Calculations?
by jpsdad - 03/28/24 04:51 PM
1 year after stocking question
by esshup - 03/28/24 04:48 PM
Fungus infection on fish
by BillyE - 03/28/24 04:35 PM
Yellow Perch Spawn 2024
by H20fwler - 03/28/24 04:29 PM
Alum vs Bentonite/Lathanum for Phosphorus Removal?
by FishinRod - 03/28/24 04:23 PM
Working on a .5acre disaster, I mean pond.
by PRCS - 03/28/24 04:13 PM
New 2 acre pond stocking plan
by LANGSTER - 03/28/24 03:49 PM
Happy Birthday Bob Lusk!!
by ewest - 03/28/24 03:37 PM
Paper-shell crayfish and Japanese snails
by esshup - 03/28/24 10:39 AM
Brooder Shiners and Fry, What to do??
by Freg - 03/28/24 09:42 AM
Dewatering bags seeded to form berms?
by Justin W - 03/28/24 08:19 AM
Reducing fish biomass
by FishinRod - 03/28/24 08:18 AM
Newly Uploaded Images
Eagles Over The Pond Yesterday
Eagles Over The Pond Yesterday
by Tbar, December 10
Deer at Theo's 2023
Deer at Theo's 2023
by Theo Gallus, November 13
Minnow identification
Minnow identification
by Mike Troyer, October 6
Sharing the Food
Sharing the Food
by FishinRod, September 9
Nice BGxRES
Nice BGxRES
by Theo Gallus, July 28
Snake Identification
Snake Identification
by Rangersedge, July 12

� 2014 POND BOSS INC. all rights reserved USA and Worldwide

Powered by UBB.threads™ PHP Forum Software 7.7.5