Pond Boss Magazine
http://www.pondboss.com/images/userfiles/image/20130301193901_6_150by50orangewhyshouldsubscribejpeg.jpg
Advertisment
Newest Members
BobMoff, unclewilco, audio21, Hidden Acres, GrandBob
15652 Registered Users
Forum Stats
15653 Members
36 Forums
36024 Topics
490116 Posts

Max Online: 1210 @ 08/23/18 11:01 PM
Top Posters
esshup 24029
Cecil Baird1 20043
ewest 19534
Dave Davidson1 13561
Bill Cody 12468
Who's Online
4 registered (Heppy, Chip, Bobbss, Keaton72), 111 Guests and 466 Spiders online.
Key: Admin, Global Mod, Mod
Topic Options
#481530 - 10/23/17 08:23 PM 8" siphon, normal vs siphon mode
roundy Offline


Registered: 09/10/16
Posts: 46
Loc: Central Illinois
My pond has an 8" siphon installed. How much water will it move in normal vs siphon mode.
_________________________
2 acres, still filling. FHM, GSH, PSC, RES, HBG, BG, LMB and YP

Top
#481534 - 10/23/17 09:00 PM Re: 8" siphon, normal vs siphon mode [Re: roundy]
KapHn8d Offline


Registered: 10/02/17
Posts: 159
Loc: TX
I don't know the answer to this... but, I would suspect you could use a gravity flow calculator for a rough estimate. I Googled up this one... maybe it will get you close?

http://www.calctool.org/CALC/eng/civil/hazen-williams_g
_________________________
96.85840735 percent clayton... the rest is just pi.

We become what we think about.

Top
#481535 - 10/23/17 09:13 PM Re: 8" siphon, normal vs siphon mode [Re: roundy]
snrub Offline


Registered: 10/05/13
Posts: 5166
Loc: SE Kansas
You should be able to do a search and find a calculator. It mostly depends on the amount of vertical drop vs the horizontal distance the water travels and the size of the pipe. The "steeper" the pipe is the more differential in pressure is created by the weight of the water.

I do not have a siphon system (bottom draw) and mine is just a surface draw pipe. But it does have several feet drop and when my NRCS guy designed the pond he did calculate its flow when it goes into siphon mode (inlet fully covered and all air expelled from pipe). It would flow lots more than just a horizontal pipe. And if it gets covered with water you can tell it is drawing water and exiting like it was under pressure.

Good luck with the calculations. An on line calculator should be out there. You will need to know the figures to plug in. Pipe diameter, vertical fall and pipe length or horizontal distance.


Edited by snrub (10/23/17 09:17 PM)
_________________________
John

I subscribe to Pond Boss Magazine

Top
#481536 - 10/23/17 09:22 PM Re: 8" siphon, normal vs siphon mode [Re: snrub]
snrub Offline


Registered: 10/05/13
Posts: 5166
Loc: SE Kansas
Here is a link to an engineering download that should help. If not I got lots of hits with a search.

web page to a site that has a pdf siphon download


Edit: oops. Pipe size starts at 12". Better look further.

The top tool on this page should come close.
water flow calc through a pipe using gravity

I used the calculator and guessed my pond at 40ft of 8" pipe with a 6' drop and came up with about 448 cu ft per minute times 7.5 gal. per cu ft equals 3360 gpm as an example.


Edited by snrub (10/23/17 09:38 PM)
_________________________
John

I subscribe to Pond Boss Magazine

Top
#486065 - 02/11/18 10:15 PM Re: 8" siphon, normal vs siphon mode [Re: snrub]
ronl Offline


Registered: 07/16/17
Posts: 4
Loc: georgia
I'm a civil engineer and I can tell that the Hazen Williams calculator applies to pipes flowing under pressure, and it grossly overstates gravity flow situations such as culverts and pond outlets.....the correct answer could be as little as 10% of what the calculator shows. Also, your question cannot be answered without a sketch of the pipe with pertinent dimensions and info as to allowable water depth at the inlet to the pipe, etc. Sorry to rain on the parade, but it's better to know the truth than to be making decisions with bad info.

Top
#486085 - 02/12/18 12:10 PM Re: 8" siphon, normal vs siphon mode [Re: roundy]
Rainman Offline
Ambassador
Field Correspondent
Hall of Fame

Lunker

Registered: 06/06/07
Posts: 6968
Loc: St Louis, MO area
Roundy, a lot of information is needed to estimate the flow of your siphon.

In "normal" mode, the pipe acts like any normal, gravity drain pipe, but when in siphon mode, the weight of the water, head pressure, pressurizes your pipe and flow increases dramatically.

Contrary to what was said about where the inlet is, the inlet location has no bearing on flow. Head pressure, (and pipe pressure) is determined by total height of the water level to the outlet, vertically.

With a 50 foot long pipe, and a 10 foot drop using smooth bore PVC and a minimal roughness coefficient, I'd conservatively estimate typical discharge flow around a minimum of 5000 GPM in "full siphon" mode, and about 500 GPM, maximum, in normal gravity drain mode....a 100 foot long pipe, but with 5 feet more of drop (15'), your flow would drop about 10% due to friction.



Edited by Rainman (02/12/18 10:15 PM)
Edit Reason: correct mistake on head pressure calculation..TY Highflyer!
_________________________
Rainman

www.TilapiaStockers.com


Top
#486099 - 02/13/18 10:17 AM Re: 8" siphon, normal vs siphon mode [Re: roundy]
highflyer Offline


Registered: 07/09/11
Posts: 1863
Loc: East Texas
Here is what our eight inch syphon pipe looks like running full. The flow is able to add about a foot and a half to the little pond before it flow out its emergency outflow. Little pond is a half acre pond.


_________________________
Brian

The one thing is the one thing
A dry fly catches no fish
Try not to be THAT 10%

Top
#486106 - 02/13/18 04:17 PM Re: 8" siphon, normal vs siphon mode [Re: roundy]
Redonthehead Offline
Fingerling

Registered: 04/03/07
Posts: 188
Loc: Missouri
I have an 8" Sch 40 PVC pipe the NRCS calculated a "peak outflow" of 4.72 cfs (2,118 GPM) at an effective height of 19 feet and 113 foot long pipe. I assumed that is in siphon mode but not sure.

This reminds me I need to haul in more broken concrete to dump in the discharge area before it eats out a big hole this spring.
_________________________

Top

Today's Birthdays
chuck olmsted, Derrickj
Recent Posts
Stocking Plan
by Heppy
8 minutes 37 seconds ago
New Pond - Starting Construction
by Dave Davidson1
Yesterday at 09:40 PM
What did you do at your pond today?
by Shorty
Yesterday at 09:00 PM
Water Loss During Initial Fill
by RAH
Yesterday at 08:16 PM
Amazing the variety of soft plastic fish attack
by Flame
Yesterday at 07:31 PM
Progress At The Farm..........
by Tbar
Yesterday at 06:02 PM
Soil question for pond renovation
by Bill D.
Yesterday at 05:01 PM
One acre pond on hillside
by Bobbss
Yesterday at 03:47 PM
Red ear in nebraska
by NEDOC
Yesterday at 03:08 PM
Hi, everyone!
by Pat Williamson
Yesterday at 02:12 PM
Newly Uploaded Images
Cant seem to Identify what this is.  Any thoughts?
Evaluating and adjusting Fish populations and ID
Vegetation ID
Our new pond
CNBG
My Best Longear so far

2014 POND BOSS INC. all rights reserved USA and Worldwide