Pond Boss Forums POND CONSTRUCTION Selecting a site Best materials to use for a dock?

We are going to be building a ~1 acre pond later this year in north central Indiana. I have been doing some research as to the cost of wood docks versus other materials, and came across synthetic materials like polyethylene that a company called EZ Dock uses to produce basically pre-configured sections that can be easily modified.

Has anyone had good or bad experiences with EZ Dock? We like things to be low maintenance so might be willing to pay more up front (vs. the cost of wood) if we don't have to worry about maintenance down the road.

https://goo.gl/maps/5VYhr85vcZ82
http://muscatinejournal.com/news/local/i...556f80d0aa.html

http://www.kwqc.com/content/misc/From-Gravel-To-Gift-437860593.html


Local lake has an EZ Dock fishing dock and gangway on the boat ramp. They get a LOT of use and have help up very nicely. Both seem extremely stable.

From my experience with both, polyethylene-polystyrene dock deck material vs wood or wood composite, the poly products are much better. Better as in no splinters, not slippery when wet, maintains its color well, and no need to periodically retreat wood (esp over the water & drips) to keep if from deterioration. IMO the poly material as long term worth is at least 3X more benefit than the cost of using wood. I have had a polystyrene top on my dock (wood joists) for 20yrs with no fading, cracking, nor splintering.

If cost is not a big factor consider contacting dock building experts Herman Brothers Pond Management for design, a building quote, and actual on site construction for you: hbpondmanagement.com

EZ docks out of TX have very good high quality products and are supporters of PondBoss. For a dock that is not elaborate as in not large, I wanted a lower cost DIY smaller dock for my newly rebuilt forage ponds. I incorporated Playstar Dock Systems products. They have aluminum frames, poly decking material, plus other good DIY materials for building wooden docks. Do your homework before pulling the trigger.

When your project is in progress or competed would you return to let other members know about your project and experiences?

plastic can get hot from the sun. Should be something you ask about when looking for decking.

Depending on your budget you may be shocked when you see the bids. I received a quote from two of the dock companies that were vendors at PB VII and they were well north of $3,500 for a 5x12 ft. dock with a walking bridge from shore to the dock. One was north of $4,500.

Given that the two bodies of water where I am now building wooden docks (each 4x22 ft.)are smaller (1.6 & 1.5 acres)we decided to only spend the big bucks at our 6.5 acre BOW that needs a new dock as well.

Bill is right, over the life of the dock the cost is probably the same or less (especially when you add in maintenance of the wood) but we couldn't justify it up front for 2 small, remote ponds that are purely used for fishing.

At some point we will spend $4k-$6k (or maybe more) for a poly dock at our big lake but it isn't going to be this year. BM61.

Get a better supplier for you peace of mind.

I've had good results with EZ Doc, put in last year. Since my water level moves up and down a good 3 to 4 feet, it's nice that the dock floats so it's easy to get in and out of our boat regardless of water level.

Hi DM, check your PM. I sent ya a little note.

I bought dock sections from Menards not cheap, but easy, and float up and down with our fluctuating water levels. Still run you close to $3.5K put in a 20’ walkway to a 8x10 platform. It’s quick and easy though. I carried each section down the the front loader on the tractor. Added a section at a time as budget allowed.
Menards has 11% off sales all the time, plus another 5% if you use their card. Ended up getting att the furniture and other stuff with the rebate savings.
Jeff