Pond Boss Magazine
http://www.pondboss.com/images/userfiles/image/20130301193901_6_150by50orangewhyshouldsubscribejpeg.jpg
Advertisment
Newest Members
deewayne2003, John Rolfe, B-rad, Cheryll, Steve Smewing
15415 Registered Users
Forum Stats
15415 Members
36 Forums
35563 Topics
484936 Posts

Max Online: 1039 @ 03/28/13 02:44 PM
Top Posters
esshup 24027
Cecil Baird1 20043
ewest 19348
Dave Davidson1 13375
Bill Cody 12366
Who's Online
22 registered (RAH, Daniel Powell, Mike Whatley, Clay N' Pray, anthropic, teehjaeh57, dreams of ponds, DrLuke, Bob-O, wbuffetjr, Matzilla, Custom 68, snrub, Zep, Redonthehead, Bill Douglas, Sunil, bucks n beaks, RStringer, bobframe, FayetteTX, John Fitzgerald), 265 Guests and 487 Spiders online.
Key: Admin, Global Mod, Mod
Topic Options
#482798 - 11/17/17 10:46 AM Raising water level
DrLuke Online   content


Registered: 06/04/15
Posts: 326
Loc: Grinnell, IA
Just thought I'd share a recent revision to my pond. Quick review, I have a 2.5 acre nearly 40 year old eutrophic pond in southeast Iowa. Newly built ave depth 13 ft, currently 8-9 ft.
After I had a shock survey done in September, one of the suggestions by the Fisheries Management staff was to consider raising my pond level. I had a local excavating company evaluate my dam and emergency overflow, and check via laser level how much I could raise my pond (maximum) before having water running out the emergency overflow. I had 4 feet of 'space' to work with. My plan is actually only to raise it 18 to 24 inches, and evaluate the effect on all the shoreline, plus any back flow into my silt ponds.
I chose to use a 'water inlet control structure' adapter, to modify my outflow pipe. It allows adding and removing 'slats' to control the water level. The existing outflow was an 18 inch corrugated steel pipe. See attached before/after photos.

Before:


After:


New outflow control structure schematic:
_________________________
"You get what you earn." - Terry Brands, state champ, National champ, Olympic silver medalist in wrestling
-------

Top
#482799 - 11/17/17 10:51 AM Re: Raising water level [Re: DrLuke]
DrLuke Online   content


Registered: 06/04/15
Posts: 326
Loc: Grinnell, IA
I hired the installation. They had to draw down my pond about 20 inches so they could shorten my existing outflow pipe a bit, and then attach the flow control structure. It then needed 4x4 posts set in 36 inches of concrete on each side, to anchor it in place. I guess they can float up if not anchored well. We will see!
_________________________
"You get what you earn." - Terry Brands, state champ, National champ, Olympic silver medalist in wrestling
-------

Top
#482800 - 11/17/17 01:15 PM Re: Raising water level [Re: DrLuke]
fish n chips Offline


Registered: 09/06/11
Posts: 2315
Loc: Northeast Ohio
Nice set-up.

Is the corrugated pipe hooked directly to the box?

Has the pond ever filled from heavy rains to use the maximum potential of the regular overflow pipe?

Any plans for a trash guard?

Top
#482801 - 11/17/17 02:05 PM Re: Raising water level [Re: fish n chips]
DrLuke Online   content


Registered: 06/04/15
Posts: 326
Loc: Grinnell, IA
Originally Posted By: fish n chips
Nice set-up.

Is the corrugated pipe hooked directly to the box?

Has the pond ever filled from heavy rains to use the maximum potential of the regular overflow pipe?

Any plans for a trash guard?



Yes, the inlet control box is collar tied to the existing pipe.

Yes, heavy rains have actually put my existing outflow pipe under water completely, but the emergency spillway has never run (in the past 3 years).

And yes, I'm planning to build a trash cage around the new inlet control this weekend (probably hog panels bent into rectangle, secured with steel posts. Might even cover the top of the cage too)
_________________________
"You get what you earn." - Terry Brands, state champ, National champ, Olympic silver medalist in wrestling
-------

Top
#482819 - 11/17/17 07:59 PM Re: Raising water level [Re: DrLuke]
scott69 Offline
Lunker

Registered: 07/12/08
Posts: 993
Loc: Chambers county(Valley), alaba...
could this be connected to the pipe on the backside of the dam and accomplished the same thing? then you wouldn't be losing fertile surface water, but pulling less desirable water from below?
_________________________
Scott Hanners

Top
#482823 - 11/17/17 11:49 PM Re: Raising water level [Re: scott69]
DrLuke Online   content


Registered: 06/04/15
Posts: 326
Loc: Grinnell, IA
Originally Posted By: scott69
could this be connected to the pipe on the backside of the dam and accomplished the same thing? then you wouldn't be losing fertile surface water, but pulling less desirable water from below?


No, it's designed for the outflow pipe (water holding side of the dam). You should search the forum for 'siphon systems' which is what I think you're thinking of..
_________________________
"You get what you earn." - Terry Brands, state champ, National champ, Olympic silver medalist in wrestling
-------

Top
#482824 - 11/18/17 07:32 AM Re: Raising water level [Re: DrLuke]
scott69 Offline
Lunker

Registered: 07/12/08
Posts: 993
Loc: Chambers county(Valley), alaba...
no matter which side of the dam the pipe turns 90 degrees upward from the thru pipe, it will control water level. water will find level. it is not common to have the standpipe on the backside of the dam, but some people do. it just seems it would have been an easy way for you to install yours without having to lower the water in order to install it.
_________________________
Scott Hanners

Top
#482826 - 11/18/17 07:36 AM Re: Raising water level [Re: DrLuke]
fish n chips Offline


Registered: 09/06/11
Posts: 2315
Loc: Northeast Ohio
If you raise the backside outlet above the current water level, I believe it would raise the pond level (probably with this box too, although that's not the intent). Water will self level itself. HOWEVER, I would not do it because eventually silt and debris settle into low areas, and that is what you are creating by doing that. Eventually you would have a clogged pipe, and a washed out dam.

Top
#482828 - 11/18/17 08:08 AM Re: Raising water level [Re: DrLuke]
DrLuke Online   content


Registered: 06/04/15
Posts: 326
Loc: Grinnell, IA
I definitely am not an expert when it comes to this stuff! I had it installed on the water side because the specs said to. It also says it is designed for low pressure and may seep a little. Maybe the backside install would be too much pressure? Still, cool idea! And maybe that's the beauty of posting this. Someone else might improve the idea.. Thanks guys!
_________________________
"You get what you earn." - Terry Brands, state champ, National champ, Olympic silver medalist in wrestling
-------

Top
#482830 - 11/18/17 08:38 AM Re: Raising water level [Re: DrLuke]
TGW1 Offline


Registered: 09/19/14
Posts: 2290
Loc: Harrison Co. Texas
Doc, your system is one I have been looking at for my future duck hunting spot. I would have already had it all going but things like college for grandkids is on the top of the list right now. Seems like every time I get ready to pull the trigger and get it done I wind up fixing their car or something unexpected spends my pond money. lol But, I will get it done someday so please keep up the posting on the system. Things like water seepage u mentioned and or guards needed etc. Thanks
_________________________
Do not judge me by the politicians in my City, State or Federal Government.
Thank The Good Lord the government in Washington DC gets little done.
Outlawing guns will make a lot of us down here in the South
Outlaws and proud of it

Tracy

Top
#482834 - 11/18/17 09:13 AM Re: Raising water level [Re: TGW1]
DrLuke Online   content


Registered: 06/04/15
Posts: 326
Loc: Grinnell, IA
Originally Posted By: TGW1
Doc, your system is one I have been looking at for my future duck hunting spot. I would have already had it all going but things like college for grandkids is on the top of the list right now. Seems like every time I get ready to pull the trigger and get it done I wind up fixing their car or something unexpected spends my pond money. lol But, I will get it done someday so please keep up the posting on the system. Things like water seepage u mentioned and or guards needed etc. Thanks


Tracy, I will definitely let you and the forum know how it goes. I am curious myself, especially after a heavy rain event with lots of outflow, what the effect will be on those slats. For me, the ability to control the water level was high on my pond wish list. Between regaining some water via increased retention from this system, and benefits of bottom diffused aeration over time, I am hoping to reverse some of those years of eutrophication.
_________________________
"You get what you earn." - Terry Brands, state champ, National champ, Olympic silver medalist in wrestling
-------

Top
#482849 - 11/18/17 11:36 AM Re: Raising water level [Re: DrLuke]
snrub Online   content


Registered: 10/05/13
Posts: 4736
Loc: SE Kansas
Neat project DrLuke.

Thanks for taking the time to share it with us.
_________________________
John

I subscribe to Pond Boss Magazine

Top
#482850 - 11/18/17 11:43 AM Re: Raising water level [Re: fish n chips]
snrub Online   content


Registered: 10/05/13
Posts: 4736
Loc: SE Kansas
Originally Posted By: fish n chips
If you raise the backside outlet above the current water level, I believe it would raise the pond level (probably with this box too, although that's not the intent). Water will self level itself. HOWEVER, I would not do it because eventually silt and debris settle into low areas, and that is what you are creating by doing that. Eventually you would have a clogged pipe, and a washed out dam.


That is how I see the problem of controlling the water height on the backside also. As long as a person had perfectly clean water it would work fine. But any debris or sediment would tend to accumulate in the pipe ahead of the control structure. Another problem could be flow amount. Water pushing horizontally through the dam then up over a control structure would flow a lot less water than water falling over a control structure into a pipe angling downward.

So if a person was going to control the water level at the back side of the dam, it seems to me a secondary (other than emergency overflow) overflow pipe slightly above max full pool of the control structure would be needed to handle large rainfall events (on a watershed pond obviously).

I really like the way DrLuke went about this. Checking the dam freeboard and finding out it was ok to raise the water level. I have raised the levels on four of my ponds so far and thinking about it on my recently created RES pond. But I am only talking 8-12" on each so not near the degree that was done here.


Edited by snrub (11/18/17 11:47 AM)
_________________________
John

I subscribe to Pond Boss Magazine

Top
#482854 - 11/18/17 02:26 PM Re: Raising water level [Re: DrLuke]
DrLuke Online   content


Registered: 06/04/15
Posts: 326
Loc: Grinnell, IA
As with everything I've done with my pond so far, I mostly followed the advice of the actual experts. There is definitely a cumulative wisdom effect of following what others are doing (and posting) on the forum. I've learned so much here that I'm motivated to try and contribute some useful knowledge. What typically happens is, I learn more from what other members comment on my original post, than I contributed in the first place (see Scott and Fish-n-chips and John's discussion above). But perhaps that's the ideal source of genuine knowledge.
_________________________
"You get what you earn." - Terry Brands, state champ, National champ, Olympic silver medalist in wrestling
-------

Top
#482855 - 11/18/17 02:41 PM Re: Raising water level [Re: DrLuke]
scott69 Offline
Lunker

Registered: 07/12/08
Posts: 993
Loc: Chambers county(Valley), alaba...
someone posted on here a long time back about putting the stand pipe on the back side. he said it was very common in his area. i didn't think about the silt in the pipe. it surely couldn't lie on the bottom. maybe up a foot or so would resolve the silt issue. i am in a warm climate, but i would think that the backside outlet could freeze. i also think the person posting about the pipe on the backside was using steel.

i thought it was a good idea because it would be pulling the bad water from the bottom. also thought it might help drluke not having to lower the water level or work in the mud. i really like what drluke did, i bet almost all of us wish we could raise our pond level or increase the size.
_________________________
Scott Hanners

Top
#482859 - 11/18/17 04:28 PM Re: Raising water level [Re: scott69]
John Fitzgerald Online   content


Registered: 10/27/15
Posts: 1896
Loc: S. end of Elkins, Arkansas
Originally Posted By: scott69
someone posted on here a long time back about putting the stand pipe on the back side. he said it was very common in his area. i didn't think about the silt in the pipe. it surely couldn't lie on the bottom. maybe up a foot or so would resolve the silt issue. i am in a warm climate, but i would think that the backside outlet could freeze. i also think the person posting about the pipe on the backside was using steel.

i thought it was a good idea because it would be pulling the bad water from the bottom. also thought it might help drluke not having to lower the water level or work in the mud. i really like what drluke did, i bet almost all of us wish we could raise our pond level or increase the size.


Steel will rupture with freezing even easier than plastic. I think the reason most people don't put it on the outside is fear of freezing. Also, if not collared and compacted well, water could wick along the pipe.
_________________________

Top
#482870 - 11/18/17 09:32 PM Re: Raising water level [Re: DrLuke]
RAH Online   content
Lunker

Registered: 05/17/09
Posts: 4074
Loc: Indiana, Boone County, 25 mile...
I have these outflow boxes on 2 of my ponds and in-line boxes on 2 of my wetlands. I keep the outflow boxes protected from UV and they have worked perfectly for many years. They are not cheap, but provide flexibility in adjusting water level. I also used hog panels to limit trash and keep out the muskrats.



Edited by RAH (11/18/17 09:39 PM)

Top
#483196 - 11/27/17 12:46 AM Re: Raising water level [Re: DrLuke]
DrLuke Online   content


Registered: 06/04/15
Posts: 326
Loc: Grinnell, IA
_________________________
"You get what you earn." - Terry Brands, state champ, National champ, Olympic silver medalist in wrestling
-------

Top
#483204 - 11/27/17 08:52 AM Re: Raising water level [Re: DrLuke]
snrub Online   content


Registered: 10/05/13
Posts: 4736
Loc: SE Kansas
Nice job. Looks good.

With the amount of dry vegetation around the pond looks like you need it.

You put plenty of surface area which should keep it from plugging up like a very small surface area guard might.
_________________________
John

I subscribe to Pond Boss Magazine

Top
#483217 - 11/27/17 10:57 AM Re: Raising water level [Re: DrLuke]
DrLuke Online   content


Registered: 06/04/15
Posts: 326
Loc: Grinnell, IA
Part of the dryness is due to pumping the pond down for the outflow pipe install. I do have some ShoreClear ready for next spring,to work the cattails back. If the water rises as hoped, I might drown out some of them.
_________________________
"You get what you earn." - Terry Brands, state champ, National champ, Olympic silver medalist in wrestling
-------

Top
#483755 - 12/05/17 11:42 AM Re: Raising water level [Re: DrLuke]
Shawk Offline


Registered: 04/07/17
Posts: 29
Loc: Iowa
Very nice DL... I'm in the same boat with ours and have bounced around what you're doing (either with that device or just adding a T connect or elbow to raise it a couple feet). Ours is around 6' so just adding a couple feet would do wonders. However, I'm really close to just breeching our dam shortly and draining it completely. Then over the next year or two get in there with a dozer and/or excavator to work the thing over well. You have a little more room to raise than I do... otherwise I'd go your route for sure. Best wishes!

Top
#483757 - 12/05/17 12:04 PM Re: Raising water level [Re: Shawk]
DrLuke Online   content


Registered: 06/04/15
Posts: 326
Loc: Grinnell, IA
Originally Posted By: Shawk
Very nice DL... I'm in the same boat with ours and have bounced around what you're doing (either with that device or just adding a T connect or elbow to raise it a couple feet). Ours is around 6' so just adding a couple feet would do wonders. However, I'm really close to just breeching our dam shortly and draining it completely. Then over the next year or two get in there with a dozer and/or excavator to work the thing over well. You have a little more room to raise than I do... otherwise I'd go your route for sure. Best wishes!


If you have the option to reset/start over, I would go for it! It will give you the opportunity to fix so many old pond issues, and remove many long term headaches. Getting rid of silt and nutrients, creating a 2 or 3 to one drop along the shoreline, adding structure pre-fill. Maybe consider a bottom draw siphon system too. If you do it, be sure and post about your projects, before and after. With lots of pictures! I've learned a ton of stuff from other pondmeisters that way. Good luck to you as well!
- Luke
_________________________
"You get what you earn." - Terry Brands, state champ, National champ, Olympic silver medalist in wrestling
-------

Top

Today's Birthdays
benji havens
Recent Posts
Pond not filling up?
by Matzilla
16 minutes 3 seconds ago
Bird leg fish transport
by Bob-O
22 minutes 2 seconds ago
Legal Question
by Zep
22 minutes 31 seconds ago
To use Japanese Beetles as feed OR not?
by John Fitzgerald
Today at 02:39 PM
Never been much for fishing, but maybe someday....
by snrub
Today at 02:14 PM
New Pond Construction In Jefferson Co, Mo.
by Bobbss
Today at 01:32 PM
Cloverleaf won't catch BHC
by Dave Davidson1
Today at 01:21 PM
Quick question...
by ewest
Today at 12:38 PM
How adaptable are LMB?
by ewest
Today at 12:34 PM
Bullhead?
by snrub
Today at 11:13 AM
Newly Uploaded Images
Help ID this fish
Crayfish monster.
Turkey Pics
Question on pond draining
King Fisher
Tree Swallow grooming---Female Red-wing black bird

2014 POND BOSS INC. all rights reserved USA and Worldwide