Forums36
Topics40,899
Posts557,071
Members18,451
|
Most Online3,612 Jan 10th, 2023
|
|
14 members (Shorthose, Justin W, Requa, Freg, DenaTroyer, Blestfarmpond, Snipe, RAH, Rick O, bstone261, Theo Gallus, esshup, jpsdad, Bing),
770
guests, and
184
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
Joined: Sep 2016
Posts: 271
|
OP
Joined: Sep 2016
Posts: 271 |
My 2 acre-ish pond is nearing final construction phase. 8" siphon system was installed yesterday, looks great but they stubbed out a 4" vent pipe for the siphon control. It will be reduced down to 2" for the balance of the vent piping. My question is: will the initial 4" piping interfere with the proper operation of the siphon system?
|
|
|
|
Joined: Jun 2007
Posts: 7,099 Likes: 22
Ambassador Field Correspondent Hall of Fame Lunker
|
Ambassador Field Correspondent Hall of Fame Lunker
Joined: Jun 2007
Posts: 7,099 Likes: 22 |
Roundy, the short answer is it will function fine.
I would also suggest you stay with the 4" size for strength over a 2" reduction. If your vent whirlpools and breaks the siphon early, a larger pipe is easier to modify and attach a paddle to. Plus, far less chance of an accidental stoppage from debris.
|
|
|
|
Joined: Jun 2007
Posts: 7,099 Likes: 22
Ambassador Field Correspondent Hall of Fame Lunker
|
Ambassador Field Correspondent Hall of Fame Lunker
Joined: Jun 2007
Posts: 7,099 Likes: 22 |
The inlet of the siphon pipe will need a Tee (or stack of large rocks) that prevents a high suction area from forming, or it will plug up quickly. It would be wise to put a cap on the siphon break also, with several 1/4" holes drilled in it so the air break does not pull in sticks that could block the pipe also, or plug the air break.
|
|
|
|
Joined: Sep 2016
Posts: 271
|
OP
Joined: Sep 2016
Posts: 271 |
This is how it is installed. Cage end on main intake and smaller cage on vent. There is one brace, but I think it needs to be braced much better to reduce vibration and protect piping. They made it all out of 4" pvc.
|
|
|
|
Joined: Sep 2016
Posts: 271
|
OP
Joined: Sep 2016
Posts: 271 |
Also seen this in one of my photos when reviewing.
|
|
|
|
Joined: Sep 2016
Posts: 271
|
OP
Joined: Sep 2016
Posts: 271 |
Overview of pond project
|
|
|
Moderated by Bill Cody, Bruce Condello, catmandoo, Chris Steelman, Dave Davidson1, esshup, ewest, FireIsHot, Omaha, Sunil, teehjaeh57
|
|