Pond Boss Magazine
https://www.pondboss.com/images/userfiles/image/20130301193901_6_150by50orangewhyshouldsubscribejpeg.jpg
Advertisment
Newest Members
Ponderific2024, MOLINER, BackyardKoi, Lumberman1985, Bennettrand
18,500 Registered Users
Forum Statistics
Forums36
Topics40,961
Posts557,951
Members18,500
Most Online3,612
Jan 10th, 2023
Top Posters
esshup 28,534
ewest 21,497
Cecil Baird1 20,043
Bill Cody 15,146
Who's Online Now
10 members (Mainer, Donatello, Joe7328, Shorthose, Snipe, NADam, ArkieJig, highflyer, Lake8, catscratch), 1,156 guests, and 276 robots.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Joined: Sep 2016
Posts: 271
R
roundy Offline OP
OP Offline
R
Joined: Sep 2016
Posts: 271
My 2 acre-ish pond is nearing final construction phase. 8" siphon system was installed yesterday, looks great but they stubbed out a 4" vent pipe for the siphon control. It will be reduced down to 2" for the balance of the vent piping. My question is: will the initial 4" piping interfere with the proper operation of the siphon system?


Joined: Jun 2007
Posts: 7,099
Likes: 23
R
Ambassador
Field Correspondent
Hall of Fame
Lunker
Offline
Ambassador
Field Correspondent
Hall of Fame
Lunker
R
Joined: Jun 2007
Posts: 7,099
Likes: 23
Roundy, the short answer is it will function fine.

I would also suggest you stay with the 4" size for strength over a 2" reduction. If your vent whirlpools and breaks the siphon early, a larger pipe is easier to modify and attach a paddle to. Plus, far less chance of an accidental stoppage from debris.



Joined: Jun 2007
Posts: 7,099
Likes: 23
R
Ambassador
Field Correspondent
Hall of Fame
Lunker
Offline
Ambassador
Field Correspondent
Hall of Fame
Lunker
R
Joined: Jun 2007
Posts: 7,099
Likes: 23
The inlet of the siphon pipe will need a Tee (or stack of large rocks) that prevents a high suction area from forming, or it will plug up quickly. It would be wise to put a cap on the siphon break also, with several 1/4" holes drilled in it so the air break does not pull in sticks that could block the pipe also, or plug the air break.



Joined: Sep 2016
Posts: 271
R
roundy Offline OP
OP Offline
R
Joined: Sep 2016
Posts: 271


This is how it is installed. Cage end on main intake and smaller cage on vent. There is one brace, but I think it needs to be braced much better to reduce vibration and protect piping. They made it all out of 4" pvc.

Joined: Sep 2016
Posts: 271
R
roundy Offline OP
OP Offline
R
Joined: Sep 2016
Posts: 271
Also seen this in one of my photos when reviewing. laugh

Joined: Sep 2016
Posts: 271
R
roundy Offline OP
OP Offline
R
Joined: Sep 2016
Posts: 271
Overview of pond project



Link Copied to Clipboard
Today's Birthdays
cobra01, Dan123, micam5, Rich B, woodster
Recent Posts
Prayers needed
by Fishingadventure - 04/24/24 11:24 PM
Inland Silver sided shiner
by Fishingadventure - 04/24/24 06:40 PM
1/2 Acre Pond Build
by Theo Gallus - 04/24/24 05:32 PM
Caught a couple nice bass lately...
by Dave Davidson1 - 04/24/24 03:39 PM
Happy Birthday Sparkplug!
by ewest - 04/24/24 11:21 AM
What did you do at your pond today?
by Sunil - 04/24/24 07:49 AM
What’s the easiest way to get rid of leaves
by esshup - 04/23/24 10:00 PM
Concrete pond construction
by FishinRod - 04/23/24 09:40 PM
Sealing a pond with steep slopes without liner
by FishinRod - 04/23/24 09:24 PM
Need help
by FishinRod - 04/23/24 01:49 PM
Howdy from West Central Louisiana
by FishinRod - 04/23/24 01:38 PM
Happy Birthday Theo!
by DrewSh - 04/23/24 10:33 AM
Newly Uploaded Images
Eagles Over The Pond Yesterday
Eagles Over The Pond Yesterday
by Tbar, December 10
Deer at Theo's 2023
Deer at Theo's 2023
by Theo Gallus, November 13
Minnow identification
Minnow identification
by Mike Troyer, October 6
Sharing the Food
Sharing the Food
by FishinRod, September 9
Nice BGxRES
Nice BGxRES
by Theo Gallus, July 28
Snake Identification
Snake Identification
by Rangersedge, July 12

� 2014 POND BOSS INC. all rights reserved USA and Worldwide

Powered by UBB.threads™ PHP Forum Software 7.7.5