|
Forums36
Topics40,962
Posts557,962
Members18,501
| |
Most Online3,612
Jan 10th, 2023
|
|
|
7 members (FishinRod, Fishingadventure, 4CornersPuddle, Bigtrh24, Boondoggle, Bill Cody, Ponderific2024),
1,109
guests, and
322
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
Joined: Jan 2017
Posts: 31
|
OP
Joined: Jan 2017
Posts: 31 |
I dug around and could not find anything in concrete. At 100' what line size do i need to use to move 2 cfm at 5psi. Is there a online calculator?
Thanks for the advise
|
|
|
|
|
Joined: Jan 2009
Posts: 28,534 Likes: 842
Moderator Ambassador Field Correspondent  Lunker
|
Moderator Ambassador Field Correspondent Lunker
Joined: Jan 2009
Posts: 28,534 Likes: 842 |
I would use 1/2"-5/8" ID airline and not give it a 2nd thought.
You might be able to get away with 3/8" but if you ever wanted to move more air in the future you'd need to upsize the line.
|
|
|
|
|
Joined: Jan 2017
Posts: 31
|
|
OP
Joined: Jan 2017
Posts: 31 |
Great thanks a lot . Very nice to have a such a great resource as this forum!!! And thanks to everyone who gives their time and experience to answer questions
|
|
|
|
|
Joined: Apr 2005
Posts: 73
Junior Member
|
|
Junior Member
Joined: Apr 2005
Posts: 73 |
Is your 100' in the water or running to it?
I have approx 100' running in 3/4" pvc from the pump to the pond edge at a T and then two 100' branches of 3/8" weighted tubing going to each diffuser. Works great.
The air volume and pressure for these systems is so low it doesn't require much. I push 20+ cfm though a 100' air hose in my shop at 175 psi.
|
|
|
Moderated by Bill Cody, Bruce Condello, catmandoo, Chris Steelman, Dave Davidson1, esshup, ewest, FireIsHot, Omaha, Sunil, teehjaeh57 |
|
