|
Forums36
Topics41,028
Posts558,654
Members18,545
| |
Most Online3,612
Jan 10th, 2023
|
|
|
11 members (ewest, Fishingadventure, RyanH, Justin W, emactxag, SCFarms, Boondoggle, Todynot, Don Kennedy, jludwig, Snipe),
987
guests, and
374
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
Joined: Jun 2013
Posts: 25
|
OP
Joined: Jun 2013
Posts: 25 |
Hello,
I have a Vertex Air-1 system that is 3 years old. I just installed the Brookwood Piston Service Kit and double checked how put it back together and now all I get is buzzing noise from the compressor. Was working before but wasn't getting the normal output from Aerator and was told that after about 2 years need to replace the piston cup and parts to bring back to normal operation. Any suggestions what might be issue now? Thanks. Ron
"Fishing and Catching are two completely different sports"
|
|
|
|
|
Joined: Oct 2013
Posts: 6,088 Likes: 96
|
|
Joined: Oct 2013
Posts: 6,088 Likes: 96 |
The other thing that can lead to low output at the diffusers is dirty diffusers. No help for your compressor problem. Diffuser cleaning
John
I subscribe to Pond Boss Magazine
|
|
|
|
|
Joined: Jan 2009
Posts: 28,607 Likes: 866
Moderator Ambassador Field Correspondent  Lunker
|
Moderator Ambassador Field Correspondent Lunker
Joined: Jan 2009
Posts: 28,607 Likes: 866 |
Ron, can you rotate the compressor by hand if the air hose is off of the unit?
|
|
|
|
|
Joined: Jun 2013
Posts: 25
|
|
OP
Joined: Jun 2013
Posts: 25 |
I've taken the compressor apart a 3rd time and made sure all replacement parts put in as per instructions. I am able to get the compressor to start by giving the fan a turn, then it runs. But if I shut it off and restart, still stuck in the buzz "load" mode until I turn fan again. Acting almost as if the motor is weak and could be failing... again any suggestions welcome. Thanks.
"Fishing and Catching are two completely different sports"
|
|
|
|
|
Joined: Jun 2013
Posts: 25
|
|
OP
Joined: Jun 2013
Posts: 25 |
Diffusers have already been cleaned, do that once or twice per season. thanks for suggestion though.
"Fishing and Catching are two completely different sports"
|
|
|
|
|
Joined: Oct 2013
Posts: 6,088 Likes: 96
|
|
Joined: Oct 2013
Posts: 6,088 Likes: 96 |
John
I subscribe to Pond Boss Magazine
|
|
|
|
|
Joined: Apr 2002
Posts: 15,165 Likes: 495
Moderator
Ambassador
Field Correspondent Lunker
|
|
Moderator
Ambassador
Field Correspondent Lunker
Joined: Apr 2002
Posts: 15,165 Likes: 495 |
Check with esshop for parts. Probably as snrub says "bad capacitor". The capacitor is responsible for getting the motor going 'turning'. Having to manually turn the motor via the fan strongly suggests weak capacitor. I've bought replacement capacitors economically on eBay.
aka Pond Doctor & Dr. Perca Read Pond Boss Magazine -
America's Journal of Pond Management
|
|
|
|
|
Joined: Jun 2013
Posts: 25
|
|
OP
Joined: Jun 2013
Posts: 25 |
Appreciate the feedback from everyone, going to try to and replace capacitor next, sounds like could be the culprit.
"Fishing and Catching are two completely different sports"
|
|
|
|
|
Joined: Jun 2008
Posts: 6,980 Likes: 15
Ambassador Lunker
|
|
Ambassador Lunker
Joined: Jun 2008
Posts: 6,980 Likes: 15 |
Is the buzzing more of a humming? If the motor is stalled I would expect a humming. With the motor unplugged, how would you rate the effort needed to rotate it by hand? Does it seem to rotate hard?
"Forget pounds and ounces, I'm figuring displacement!"
If we accept that: MBG(+)FGSF(=)HBG(F1)
And we surmise that: BG(>)HBG(F1) while GSF(<)HBG(F1)
Would it hold true that: HBG(F1)(+)AM500(x)q.d.(=)1.5lbGRWT?
PB answer: It depends.
|
|
|
|
|
Joined: Jun 2013
Posts: 25
|
|
OP
Joined: Jun 2013
Posts: 25 |
Just wanted to follow-up...
Issue was a bad capacitor, replaced and now working properly. Thanks again for all the feedback/suggestions. Ron
"Fishing and Catching are two completely different sports"
|
|
|
|
|
Joined: May 2013
Posts: 2,906 Likes: 147
|
|
Joined: May 2013
Posts: 2,906 Likes: 147 |
docoman, Do you have a picture or a replacement part description for the capacitor? I think I identified my capacitor and it has a rubber sleeve over it? My sleeve is ripped and I did want to try to protect the electrical parts under it. I didn't know if you identified why the capacitor went bad or how hard it as to get a replacement and solder it in?
|
|
|
Moderated by Bill Cody, Bruce Condello, catmandoo, Chris Steelman, Dave Davidson1, esshup, ewest, FireIsHot, Omaha, Sunil, teehjaeh57
|
There are no members with birthdays on this day. |
|
|
|
