Pond Boss Magazine
https://www.pondboss.com/images/userfiles/image/20130301193901_6_150by50orangewhyshouldsubscribejpeg.jpg
Advertisment
Newest Members
Shotgun01, Dan H, Stipker, LunkerHunt23, Jeanjules
18,451 Registered Users
Forum Statistics
Forums36
Topics40,899
Posts557,080
Members18,451
Most Online3,612
Jan 10th, 2023
Top Posters
esshup 28,414
ewest 21,474
Cecil Baird1 20,043
Bill Cody 15,110
Who's Online Now
14 members (jludwig, Donatello, catscratch, DrLuke, esshup, Requa, Shorthose, Blestfarmpond, JasonInOhio, H20fwler, Theo Gallus, Justin W, LeighAnn, Bob Lusk), 844 guests, and 210 robots.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Joined: Dec 2012
Posts: 136
2
OP Offline
2
Joined: Dec 2012
Posts: 136
I’m planning to fence my place in Q1 of 2017 and build a gated entrance. What I have in mind will look very much like this pic, which is my neighbors place from Google street view. Scope of work is approx 2200 LF of 3 rail, PVC ranch fence. Gate will be 12’ single swing wrought iron or aluminum gate on an automatic opener. Some specific questions are.

1. Which gate is preferred, wrought iron or aluminum?

2. Brick columns will be 24” square x 7’ tall beside the gate and outlying columns will be 20” square and 6’ tall. How thick should the concrete pads be these columns are built upon? The concensus seems to be 6-8” thick, the columns in the pic are sitting on pads 36” thick. I’m a big fan of “overdoing” but that seems a bit much ,even for me.

3. The top selling gate opener seems to by “Mighty Mule” and they are about the least expensive. Any knowledge or experience with gate openers?

Thanx in advance for your input.

2O2S


Joined: Oct 2014
Posts: 6,080
Likes: 1
Offline
Joined: Oct 2014
Posts: 6,080
Likes: 1
That would look great! I have a lot of similar structures around my place. My piece of advice is, if you ever think you might want to put lights on top of those columns, build that capability in by providing for wire access during construction.

If you can get the look you want, I would go with aluminum. Less weight on the hinges and opening system and no worries about rust.

I'm not familiar with the automatic gate opening brand you're talking about. When we lived in a place that had a system like that we had an intercom to talk to visitors and could open the gate from the house. Those were nice features.

Last edited by Bill D.; 01/02/17 09:14 AM.

[Linked Image]
Be Brave Enough to Suck at Something New!
Joined: Sep 2014
Posts: 3,668
Likes: 57
T
Offline
T
Joined: Sep 2014
Posts: 3,668
Likes: 57
After replacing a one gate opener I can tell you they are not cheep. I would take an extended warranty if offered. I bought the one offered at Tractor supply, it did not last very long (just over the warranty). I am looking at this time for a better brand.


Do not judge me by the politicians in my City, State or Federal Government.


Tracy
Joined: Feb 2011
Posts: 5,284
Likes: 288
Moderator
Offline
Moderator
Joined: Feb 2011
Posts: 5,284
Likes: 288
2O2S, we have a brick gate, and have a 6" pipe on the gate hinge side, and IIRC, we sank it 4' deep, with concrete. It's held up well. I think our pad for the brick columns is 8".

I agree with Bill. If you can, add electricity.

I replaced our old gate opener with a Mighty Mule this last spring. I started having circuit board issues after a few months, and got with MM's phone support. Outstanding real-human customer service, and I had a new circuit board on it's way that same day.

I got the 20' model for our 14' steel gate, and it handles the weight well.


AL

Joined: Jan 2015
Posts: 996
Likes: 57
T
Offline
T
Joined: Jan 2015
Posts: 996
Likes: 57
What type soil are you on?

If it is like some of the expansive clay soils we have in parts of north Texas I would do deep piers. It is sad to see those expensive brick entryways cracked and leaning after a few years.

Regarding the gate openers I went with solar powered Apollo that has worked well(knock on wood) for the last 3years. Also had a ground sensor added to make exiting easier for guests. I later added a wireless transmitter so we could open the gate from inside the house when guests arrive.

120volts is probably the best solution but it was not an option for me due to distance.

Joined: Jul 2011
Posts: 2,183
Likes: 44
Offline
Joined: Jul 2011
Posts: 2,183
Likes: 44
I have two friends with Mighty Mule openers and they are happy.


Brian

The one thing is the one thing
A dry fly catches no fish
Try not to be THAT 10%
Joined: Dec 2012
Posts: 136
2
OP Offline
2
Joined: Dec 2012
Posts: 136
Thanx for the responses, much appreciated. I’ve decided to go with an aluminum gate to minimize weight to reduce stress on the gate opener. I plan to go with the Mighty Mule opener, I see no reason to spend more money for one at this point. I think the key to longevity is proper installation and grounding. I plan to run AC power, water, CAT-5 and a coax to the gate, you never know what you’ll need tomorrow.

The soil in south Georgia is sandy (think Florida), so I’ve decided not to mount the gate on the brick column, instead I’ll install an adjacent steel post with outriggers per the attached pic. This should ensure the gate and column remains vertical.

I’ve got all my bids back for building the columns, two of them tied at $3500, or $700 per column, material and labor. The columns in the first pic I posted were installed 10 years ago at a cost of $600 per column, so I think this is reasonable.

I also forgot to mention the fence cost of $7.25 per foot, material and labor. From the research I’ve, I think this is pretty reasonable.

Thanx again

2O2S


Joined: Dec 2012
Posts: 136
2
OP Offline
2
Joined: Dec 2012
Posts: 136
I finally made some headway on this project, finished the brick work and got the fence installed last week. Ordered a powder coated aluminum gate (105 #’s) and it should be ready next week. I know that without pix, it never happened so here are a few.

2O2S










Joined: May 2009
Posts: 5,714
Likes: 281
R
RAH Offline
Lunker
Offline
Lunker
R
Joined: May 2009
Posts: 5,714
Likes: 281
Beautiful! Thanks for posting pictures.

Joined: Oct 2014
Posts: 6,080
Likes: 1
Offline
Joined: Oct 2014
Posts: 6,080
Likes: 1
Outstanding! Well done Sir!


[Linked Image]
Be Brave Enough to Suck at Something New!
Joined: Aug 2014
Posts: 1,381
Likes: 46
W
Offline
W
Joined: Aug 2014
Posts: 1,381
Likes: 46
looks great!


Keep This Forum Viable, Read Pond Boss Magazine -
America's Journal of Pond Management
Joined: Oct 2013
Posts: 6,086
Likes: 93
S
Offline
S
Joined: Oct 2013
Posts: 6,086
Likes: 93
That looks a lot nicer than the barb wire fence that runs beside our property. Showed it to wife and she likes it, but fortunately got no new ideas.........yet.

Last edited by snrub; 05/20/17 07:19 AM.

John

I subscribe to Pond Boss Magazine
Joined: Mar 2007
Posts: 1,012
Hall of Fame
Junior Member
Offline
Hall of Fame
Junior Member
Joined: Mar 2007
Posts: 1,012
nice job... that fence is a beauty


1 ac pond LMB, BG, RES, CC
Joined: Jan 2009
Posts: 28,414
Likes: 792
Moderator
Ambassador
Field Correspondent
Lunker
Online Content
Moderator
Ambassador
Field Correspondent
Lunker
Joined: Jan 2009
Posts: 28,414
Likes: 792
That looks great!!!


In regards to gates, does anyone have any experience with gates that slide open vs. pivot? Here in snow country, pivot gates might have problems..... A client has an 18' wide gravel drive and is looking at putting up a gate.


www.hoosierpondpros.com


http://www.pondboss.com/subscribe.asp?c=4
3/4 to 1 1/4 ac pond LMB, SMB, PS, BG, RES, CC, YP, Bardello BG, (RBT & Blue Tilapia - seasonal).
Joined: Jul 2010
Posts: 3,793
Likes: 71
Zep Offline
Hall of Fame 2014
Offline
Hall of Fame 2014
Joined: Jul 2010
Posts: 3,793
Likes: 71
That looks great....really nice, upscale....I have the same white fence.

My only concern is the width of that entry...could a cement truck, FedEx truck, or a Fire Truck easily squeeze through that entry? And if they can, is it so close that eventually bricks are gonna get hit? Maybe you have another side entry, or of course a section of the white fence can be easily removed if needed. Irregardless it looks really nice, almost like a race horse farm in Kentucky.


Fishing has never been about the fish....

Joined: Jul 2011
Posts: 2,183
Likes: 44
Offline
Joined: Jul 2011
Posts: 2,183
Likes: 44
2O2S,

Great progress. Keep it up!


Brian

The one thing is the one thing
A dry fly catches no fish
Try not to be THAT 10%
Joined: Dec 2012
Posts: 136
2
OP Offline
2
Joined: Dec 2012
Posts: 136
Thanx for the kind words. The opening between the gate columns is 12' 2", which is pretty standard for most entry gates. That will accomodate a 12' gate plus 2" for the hinges. The max width for vehicles allowed by federal regulations is 9', so I don't anticipate any problems. Camera's can trick the eye sometimes, around the holidays they even make me look fat! The distance between the gate columns and the columns by the road is 40', between the gate columns and the edge of road is 58'. Here is another perspective that shows the width with a vehicle in it.


Joined: Jul 2010
Posts: 3,793
Likes: 71
Zep Offline
Hall of Fame 2014
Offline
Hall of Fame 2014
Joined: Jul 2010
Posts: 3,793
Likes: 71
perfect man...congrats!

ps: love the pine trees


Fishing has never been about the fish....

Joined: Jun 2016
Posts: 48
S
Offline
S
Joined: Jun 2016
Posts: 48
2old2soon, 12 feet is more than enough for a fire truck to pass through. they only require a 10 foot lane. They do take a lot more room for a turning radius but it sound like the width of the road to you first column is ample distance to make the turn into your place. Your fence and columns look great.


Link Copied to Clipboard
Today's Birthdays
Bob Lusk, GaryK, GrizzFan, PhotographerDave
Recent Posts
New 2 acre pond stocking plan
by Donatello - 03/28/24 11:35 AM
1 year after stocking question
by esshup - 03/28/24 11:01 AM
Paper-shell crayfish and Japanese snails
by esshup - 03/28/24 10:39 AM
Happy Birthday Bob Lusk!!
by Theo Gallus - 03/28/24 10:27 AM
Brooder Shiners and Fry, What to do??
by Freg - 03/28/24 09:42 AM
Relative weight charts in Excel ? Calculations?
by esshup - 03/28/24 08:36 AM
Dewatering bags seeded to form berms?
by Justin W - 03/28/24 08:19 AM
Reducing fish biomass
by FishinRod - 03/28/24 08:18 AM
Questions and Feedback on SMB
by Donatello - 03/27/24 03:10 PM
2024 North Texas Optimal BG food Group Buy
by Dave Davidson1 - 03/27/24 08:15 AM
Freeze Danger? - Electric Diaphragm Pump
by esshup - 03/26/24 09:47 PM
Newly Uploaded Images
Eagles Over The Pond Yesterday
Eagles Over The Pond Yesterday
by Tbar, December 10
Deer at Theo's 2023
Deer at Theo's 2023
by Theo Gallus, November 13
Minnow identification
Minnow identification
by Mike Troyer, October 6
Sharing the Food
Sharing the Food
by FishinRod, September 9
Nice BGxRES
Nice BGxRES
by Theo Gallus, July 28
Snake Identification
Snake Identification
by Rangersedge, July 12

� 2014 POND BOSS INC. all rights reserved USA and Worldwide

Powered by UBB.threads™ PHP Forum Software 7.7.5