This is a Manfrotto 322RC2 Joystick camera mount with a LaRue quick disconnect rail adapter that LaRue made specifically for it. They are designed to mount on tripods.
I have a motion detector mounted to the feeder that sends a signal to a chime in the house. When it goes off I carry the gun to the back fence....lock in the quick connect and shoot.
Consider the next upper in 300 AC blackout. It is very quiet using subsonic heavy round. A "can" also helps if you want multiple shots before they scatter.
Brian
The one thing is the one thing A dry fly catches no fish Try not to be THAT 10%
Consider the next upper in 300 AC blackout. It is very quiet using subsonic heavy round. A "can" also helps if you want multiple shots before they scatter.
Brian I have spoken to several people that have that set up. They are very happy with them.
It is a driveway monitor. Got it from Radio Shack but the model looks to have been discontinued. It has been in use 24/7/365 for over 2-1/2 years now and is still working(knock on wood). Distance I am working with is 750 feet.
That looks like fun. I have a LED solar security light on my feeder. I have one of the 2 lights pointed toward the house so I can tell when they are at the feeder. I have a couple cans I'm waiting on now. Hoping they should be approved in the next 30 days or so. Also fun to stalk up within about 20-30 yards with a 12 gauge and 00 shot when the wind is right. It can get exciting in a hurry!
1.8 acre pond with CNBG, RES, HSB, and LMB Trophy Hunter feeder.
That looks like fun. I have a LED solar security light on my feeder. I have one of the 2 lights pointed toward the house so I can tell when they are at the feeder. I have a couple cans I'm waiting on now. Hoping they should be approved in the next 30 days or so. Also fun to stalk up within about 20-30 yards with a 12 gauge and 00 shot when the wind is right. It can get exciting in a hurry!
BrianL, since I like spending other people's money, SilencerCo has a 12 gauge suppressor. Just sayin'.
TBAR, does that motion detector have to be direct line of sight? I've recently had a break in(lock on gate cut) but nothing lost yet. But there is a hill and trees between my gate and house.
It's not about the fish. It's about the pond. Take care of the pond and the fish will be fine. PB subscriber since before it was in color.
Without a sense of urgency, Nothing ever gets done.
Boy, if I say "sic em", you'd better look for something to bite. Sam Shelley Rancher and Farmer Muleshoe Texas 1892-1985 RIP
TBAR, does that motion detector have to be direct line of sight? I've recently had a break in(lock on gate cut) but nothing lost yet. But there is a hill and trees between my gate and house.
Dave, pretty sure these need to be line of sight. Maybe one of those game cams that text you pictures would work???
That's probably in the game plan. I have installed 4 no flash ones but I don't recognize my self over 10 ft. About to put up some motion detector lights to help the cams at the house. Essentially, this is driving me nuts. I want somebodys butt in jail. Wife nixed the idea of trip wire and shotgun.
It's not about the fish. It's about the pond. Take care of the pond and the fish will be fine. PB subscriber since before it was in color.
Without a sense of urgency, Nothing ever gets done.
Boy, if I say "sic em", you'd better look for something to bite. Sam Shelley Rancher and Farmer Muleshoe Texas 1892-1985 RIP
People go in and out of my remote rural property all the time (I see tire tracks), but no one has ever broken into the cabin or outbuilding. They have been there 10.5 years. I think they are just spot lighters or ATV joyriders.
That's probably in the game plan. I have installed 4 no flash ones but I don't recognize my self over 10 ft. About to put up some motion detector lights to help the cams at the house. Essentially, this is driving me nuts. I want somebodys butt in jail. Wife nixed the idea of trip wire and shotgun.
Dave , I have the "original driveway alert" and have used it for about 3 years. Their "heavy duty" one will go around a building and does not have to be direct line like most. I have been very pleased with mine. Bought it specifically because I have buildings in the way.
Dear Alcohol, We had a deal where you would make me funnier, smarter, and a better dancer... I saw the video... We need to talk.
They are baaaack.....two nights in a row the motion detector on the feeder went off.
First kill was at 200 yards.....the buzzards had totally consumed it buy 8:30am the next morning.
Second kill I had to stalk as the cows were directly in the way. The up side was they gave me cover to close in to 60 yards. Battery was dead on the MDVR so no video.....Arrrggg!!!
The reason I ask is there is a lot of movement after the first shot and I think that recoil could be greatly reduced. Also, if I do the math right, your lead on the second shot ( the mover) was not enough. I would be glad to offer some suggestions if you think it would help your efforts.
Brian
The one thing is the one thing A dry fly catches no fish Try not to be THAT 10%
The reason I ask is there is a lot of movement after the first shot and I think that recoil could be greatly reduced. Also, if I do the math right, your lead on the second shot ( the mover) was not enough. I would be glad to offer some suggestions if you think it would help your efforts.
This is a gas system. I might do piston someday. Two factors involved with the perceived recoil. 1) I was relying on the mount for support.....wasn't braced and 2) I had the scope at a high magnification.
If you are referring to the video dated 01/29/17 I indeed missed that one. On the run and in this case closing distance to 150 yards quartering to me.
I hit the 2nd moving target in the 02/04/17 post. Don't know what I did different.
If you have suggestions......shoot. I am all ears.
FWIW.....these are stock off the shelf 115gn FMJ's. I am reloading the cases with Horaday 120gn SST's but have not brought them on line for hunting yet.
I have processed some small ones in the past but did not process this one.
Feral hogs are a lot of work hand butchering for a small amount of meat in general, at least for the ones I did. About 3 years ago when I had a lot of hogs to deal with, I ended up using ..... a Sawz-all from DeWalt after gutting to pull the head/neck off and splitting both hams/shoulders leaving the thin back alone. After a while, I stopped doing that and they just became Coyote bait as I had more than enough in the freezer. Pork chops were also very cheap at the local grocery store.
Little piglets in a smoker are a different story if I tag some today. They are also easier to work with though, unfortunately are a bit hard to find where I live as I think they stay back in trees until adults.
I also used some 'donors' to practice salt curing meat. That was a fun exercise and made skinning out a sow worth the effort.
A front end loader on a tractor and a good knife with lots of practice make skinning out a feral hog a lot easier so, if you are new to it don't give up on the first few. I found the bristles were very hard on the knife I used initially and my cuts were not very good. With a little anatomy knowledge from earlier butchering 'attempts', things got better pretty quick until the point I opted for the Sawz-all for choice cuts FAST butchering (though I was getting double digits a week and as many as 7 hogs in one night).
After using a 5.56 and a 6.8SPC, I must say I am a huge convert to 6.8SPC for feral hogs and coyotes. 6.8's will put them down when a 5.56 won't due to less than ideal shot placement. Sometimes, my aim is not the best so I can use all the help the ammo company can provide at times.
The other word of warning with night shooting and thermals. A lot of the more 'affordable' units don't have the best resolution and clarity of the image you are viewing. For me, deer are the worst or more specifically the fawns. Horses and cattle are easy to identify due to body shape, stature and, movement while grazing. If adult deer are grazing, looking at fawns in the grass is tricky. At ~100~200 yards, a fawn hiding in the grass is indistinguishable from a piglet that isn't moving. If you see a lot of deer and see the faint 'piglet' looking images, observe them closely! Last year I hit the Lotto Jackpot one night when I counted 27 adult deer in the thermal scope. That night the fawns really looked like a litter of piglets in the grass initially. It is easy to overlook the details and falsely identify a fawn if you don't have 3rd gen Night Vision to interrogate the thermal image. Behavior and body movement are important if all you have is a thermal image of average quality.
A final word of consideration. If like me, you shoot hogs all night on your property, your neighbors are not going to be happy if they are big city transplants for the weekend. Even if they aren't nervous hearing rifle fire during the day, random rifle fire all night can be upsetting. A suppressor really helps alleviate complaints from neighbors.
I second using a can. That will probably allow you to get at least one more shot off before they turn on the afterburners.
I'd give them about another foot to 18" lead at 200 yds when they are running hard and see what happens. Keep the muzzle swinging as you squeeze the trigger. Stopping the gun equates to shooting behind them.
I second using a can. That will probably allow you to get at least one more shot off before they turn on the afterburners.
I'd give them about another foot to 18" lead at 200 yds when they are running hard and see what happens. Keep the muzzle swinging as you squeeze the trigger. Stopping the gun equates to shooting behind them.
Where I shoot, without a suppressor they run away from me. With a suppressor they all run random directions because they hear the bullet impact more than the muzzle blast and wonder where it came from.
With some running full tilt left, some full tilt right, some at me and, some away the challenge is different but, I also have more time to take more shots since they don't all hit cover or get out of range (or in front of a bad backstop like cattle in the next pasture, a house, or public road, or ...) at the same time.
Last night the pig alarm went off. Went out and there were probably 30+. Had to stalk out to them because the cows were in the way. Only got one but did get a video that I will upload this weekend. Still shooting 115gn FMJ's.
This is a poor quality video.......I had way too much contrast. Next time I will make adjustments before I hunt. I attempted to get a pass through two for one on the first shot but no luck. Listening to the sound on the video I think I hit the pig on the last shot.
Wow, that is a bunch of hogs, good luck thinning them out some. I'm guessing the cows didn't like the shooting to much. Thanks for posting, I have enjoyed keeping up with your exploits.
With the flooding going on around Houston, how soon will the hogs come back once the waters recede?
I'm not an expert but I would think if they left they would return asap to take advantage of the food source(worms, grubs, bugs driven to the surface).
good going Tbar! Shoot 'em all! It is really satisfying to take out a double like that, isn't it? On occasion, I have two, or even more, gobblers come in to the call in spring. I take one out, and have to sit with a loaded gun until the other(s) leave. How would it be to take "a left and a right", as they say in Britain!?
.gif)
Sometimes, my aim is not the best so I can use all the help the ammo company can provide at times. 
![[Linked Image from corvettejunkie.com]](http://www.corvettejunkie.com/pb.gif)
