|
Forums36
Topics40,902
Posts557,116
Members18,452
|
Most Online3,612 Jan 10th, 2023
|
|
1 members (anthropic),
750
guests, and
227
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
Anonymous
Unregistered
|
Anonymous
Unregistered
|
I am considering building a pond in Northwest Florida. Unfortunately, the soil is basically sand as you might expect. My first attempt failed as the pond completely percolated out when I dug it: I didn't put down a liner or make any ammendments to the existing soil. I am now going to try to do it the "right way". I am thinking of building about a 75'x75' pond (approxmate 6' depth) with a 45 mil EPDM liner (with underlayment), well for the water source, and a small aerator. The primary use will be for fishing: a few bass & bluegill.
A few questions: any advice on the liners? It seems like underlayment runs about $.20/sf and liners at about $.38/sf? I assume aeration is a good idea for this size pond? Do you think I can install and seam the liner myself? Any other input/advice would be appreciated...
Thanks!
|
|
|
|
Joined: Nov 2011
Posts: 2,177 Likes: 28
|
Joined: Nov 2011
Posts: 2,177 Likes: 28 |
I doubt you can put the liner in youself. I have a 20x20 liner, and I cannot move it myself. It is heavy and awkward!
|
|
|
Moderated by Bill Cody, Bruce Condello, catmandoo, Chris Steelman, Dave Davidson1, esshup, ewest, FireIsHot, Omaha, Sunil, teehjaeh57
|
|
|