Forums36
Topics40,963
Posts557,985
Members18,503
|
Most Online3,612 Jan 10th, 2023
|
|
6 members (Freunb02, jmartin, phinfan, Boondoggle, liquidsquid, Bill Cody),
1,239
guests, and
268
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
Joined: Aug 2016
Posts: 19
|
OP
Joined: Aug 2016
Posts: 19 |
Around what depth do FHM spawn at? I'm working on a new pond and am thinking about using it to raise FHM and so I'm trying to figure out how shallow shelfs and flats should be to encourage them spawn. Also does anybody have any pictures or examples of types of structures used for FHM to spawn?
|
|
|
|
Joined: Oct 2013
Posts: 6,088 Likes: 96
|
Joined: Oct 2013
Posts: 6,088 Likes: 96 |
From just below the surface to something around 3 feet. Pallets, boards or waxed cardboard floating on the surface (preferably stationary). 1 to 2 ft deep is what I would shoot for.. FHM condo Another one I built later. Notice the addition of the floating insulation. I have had to add this to all my FHM pallets because they eventually waterlog and sink without it. FHM stacked pallets I basically used old boards spaced an inch or two apart to create multiple levels for the FHM to use the underside. They are teritorial so need areas about 18" area for the male to protect. Multiple levels makes areas for numerous nests. Narrow spacing of boards offers some protection from predators.
Last edited by snrub; 08/17/16 06:52 PM.
John
I subscribe to Pond Boss Magazine
|
|
|
|
Joined: Oct 2014
Posts: 6,080 Likes: 1
|
Joined: Oct 2014
Posts: 6,080 Likes: 1 |
From just below the surface to something around 3 feet. Pallets, boards or waxed cardboard floating on the surface (preferably stationary). 1 to 2 ft deep is what I would shoot for..
..... +1 IMHO, in the absence of predators, floating or suspended spawning surfaces work well. If the pond has BG or other predators, I would stick with sunken habitat in shallow water, like pallets, where predators have very limited access to the spawning surfaces and new spawn from below. Nearby vegetation for the new spawn to hide and feed in is also a plus if the goal is to maximize survival of the FHM.
Last edited by Bill D.; 08/17/16 09:10 PM.
Be Brave Enough to Suck at Something New!
|
|
|
|
Joined: Oct 2013
Posts: 6,088 Likes: 96
|
Joined: Oct 2013
Posts: 6,088 Likes: 96 |
Good points Bill. With no apex predators and only small BG, the FHM will spawn about anywhere there is a underside surface. But in my sediment and forage ponds I have adult Lepomis but no bass and the big BG and RES hammer them pretty hard. Safe spawning habitat in my opinion is more important in that situation than in a brand new pond.
John
I subscribe to Pond Boss Magazine
|
|
|
|
Joined: Jan 2009
Posts: 28,535 Likes: 842
Moderator Ambassador Field Correspondent Lunker
|
Moderator Ambassador Field Correspondent Lunker
Joined: Jan 2009
Posts: 28,535 Likes: 842 |
In a stormwater retention pond without predators I have seen them spawning on the underside of lily pads.
|
|
|
Moderated by Bill Cody, Bruce Condello, catmandoo, Chris Steelman, Dave Davidson1, esshup, ewest, FireIsHot, Omaha, Sunil, teehjaeh57
There are no members with birthdays on this day. |
|
|
|