Forums36
Topics40,947
Posts557,814
Members18,486
|
Most Online3,612 Jan 10th, 2023
|
|
|
Joined: Mar 2014
Posts: 887 Likes: 3
|
OP
Joined: Mar 2014
Posts: 887 Likes: 3 |
I'm sure this has been discussed but I couldn't find anything in a search. I have 3 or 4 old artificial Christmas trees in the attic, shop, and garage. Any issue using them to make a brush pile that will never rot? These are the one that you put each branch in at a time. Any thoughts?
1.8 acre pond with CNBG, RES, HSB, and LMB Trophy Hunter feeder.
|
|
|
|
Joined: Apr 2002
Posts: 15,141 Likes: 488
Moderator Ambassador Field Correspondent Lunker
|
Moderator Ambassador Field Correspondent Lunker
Joined: Apr 2002
Posts: 15,141 Likes: 488 |
Best way to place them is vertical / upright. See examples in the Common Pond Q&A in the Archives section main Forum page. http://forums.pondboss.com/ubbthreads.php?ubb=showflat&Number=92463#Post92463
Last edited by Bill Cody; 01/20/16 05:26 PM.
aka Pond Doctor & Dr. Perca Read Pond Boss Magazine - America's Journal of Pond Management
|
|
|
|
Joined: Dec 2015
Posts: 103
|
Joined: Dec 2015
Posts: 103 |
Hey Bill, most of those links in the first post of that thread will not open for me.
Go Hogs!
|
|
|
|
Joined: Mar 2014
Posts: 887 Likes: 3
|
OP
Joined: Mar 2014
Posts: 887 Likes: 3 |
I have seen all kinds of artificial cover on PB, just nothing out of artificial Christmas trees. They seem like they would be way more dense, last a very long time, and not degrade over time like real christmas trees. Just thought I might be missing something.
1.8 acre pond with CNBG, RES, HSB, and LMB Trophy Hunter feeder.
|
|
|
|
Joined: Sep 2014
Posts: 3,668 Likes: 57
|
Joined: Sep 2014
Posts: 3,668 Likes: 57 |
Brian, I built a crib using pvc, deer fencing (1" squares), and patio weaved plastic screen (3" triangular openings) to build the crib. I add a artificial Christmas tree inside the crib and sunk it all into the pond. Not sure how well the crib actually works but its still there in about 9 foot of water. Top of crib is about two and a half foot below surface.
Tracy
Do not judge me by the politicians in my City, State or Federal Government.
Tracy
|
|
|
|
Joined: Sep 2014
Posts: 1,596 Likes: 28
|
Joined: Sep 2014
Posts: 1,596 Likes: 28 |
Brian, I have several artificial trees in my 2 acre pond. I did place one in the deepest spot and wired it to a t-post standing straight up.This was done before the pond filled. There have been comments about the wire poking you if swimming. You can lay them near the shore where if and when they start to decompose you will be able to retrieve them. An idea I came up with you might like is this...Take a long piece of 4-6 inch pvc pipe.drill small holes on just the bottom and stagger the holes some.Take each individual limb,make a little L or Z bend in the end of the wire and "hang" in the hole. Do this all the way down the pipe to make a "hedge" of Christmas tree limbs. I drove t-posts in the bottom of the pond and wired each end of the pipe to them. This is in about 4 ft of water. The t-posts stick up out of the water well enough to be seen and stayed away from. I catch fish next to this all the time. Let me know what you think. Good luck.
Dear Alcohol, We had a deal where you would make me funnier, smarter, and a better dancer... I saw the video... We need to talk.
|
|
|
|
Joined: Aug 2014
Posts: 22
|
Joined: Aug 2014
Posts: 22 |
Hey Bill, most of those links in the first post of that thread will not open for me. I have the same issue. I feel bad asking questions about structure but most of these links wont open...did the website change after those were written?
|
|
|
|
Joined: Mar 2005
Posts: 21,490 Likes: 265
Moderator Hall of Fame 2014 Lunker
|
Moderator Hall of Fame 2014 Lunker
Joined: Mar 2005
Posts: 21,490 Likes: 265 |
Yes twice. I try to change some but there are thousands like that.
|
|
|
|
Joined: Mar 2014
Posts: 887 Likes: 3
|
OP
Joined: Mar 2014
Posts: 887 Likes: 3 |
Flame, A couple of my mine are old school trees that you had to put each limb on one at a time and they are already bent in a 90 at the end, so that would be easy to do with the PVC pipe...
Been looking at making a couple crib structures, so might be better to incorporate them into those instead of trying to make a tree type brush pile.
My pond is already full. In fact is was full after a couple weeks on the construction, so I didn't get much cover put in. I built a good bit of structure before the rain hit though.
Thanks for all the info.
Last edited by BrianL; 01/21/16 04:42 PM.
1.8 acre pond with CNBG, RES, HSB, and LMB Trophy Hunter feeder.
|
|
|
|
Joined: Apr 2002
Posts: 15,141 Likes: 488
Moderator Ambassador Field Correspondent Lunker
|
Moderator Ambassador Field Correspondent Lunker
Joined: Apr 2002
Posts: 15,141 Likes: 488 |
BrianL - try assembling the trees and imbed them in some sort of thin cement wide diameter base so they stand upright. One embedded at an angle in each side of a cement block would be one option. Provide us some pictures for the Archives what ever you decide to do, so others can benefit from your creativity.
Last edited by Bill Cody; 01/21/16 05:01 PM.
aka Pond Doctor & Dr. Perca Read Pond Boss Magazine - America's Journal of Pond Management
|
|
|
Moderated by Bill Cody, Bruce Condello, catmandoo, Chris Steelman, Dave Davidson1, esshup, ewest, FireIsHot, Omaha, Sunil, teehjaeh57
|
|