Pond Boss Magazine
https://www.pondboss.com/images/userfiles/image/20130301193901_6_150by50orangewhyshouldsubscribejpeg.jpg
Advertisment
Newest Members
Ponderific2024, MOLINER, BackyardKoi, Lumberman1985, Bennettrand
18,500 Registered Users
Forum Statistics
Forums36
Topics40,961
Posts557,951
Members18,500
Most Online3,612
Jan 10th, 2023
Top Posters
esshup 28,534
ewest 21,497
Cecil Baird1 20,043
Bill Cody 15,146
Who's Online Now
10 members (Zep, Mainer, Donatello, Joe7328, Shorthose, Snipe, NADam, ArkieJig, highflyer, Lake8), 1,160 guests, and 279 robots.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Joined: Apr 2015
Posts: 4
S
SRK Offline OP
OP Offline
S
Joined: Apr 2015
Posts: 4
Posted earlier in the spring about stocking a smaller pond that was on my property. Long story short it leaked badly and I moved into another direction, mainly from learning from this site and having other uses for the old location.

With all the new knowledge, I have since built a new one (correctly) that is doing nicely. It is holding water (1/4 full), has solid run off and a deep well to supplement. Unhappy with the depth of the old pond and needing a lot of dirt for another project this 3/4 acre is 20 feet deep, with steep banks.

I want to aerate the pond and do it right. I don't want to over pay, but want the right system to turn over the pond at those depths. Firm believer in overkill and getting the right equipment for the job and then some. I'd like to support the vendors here and am open to suggestions.

Thanks for the help!


Last edited by SRK; 08/29/15 11:43 AM.
Joined: Aug 2015
Posts: 7
O
Offline
O
Joined: Aug 2015
Posts: 7
This is a good kit I am familiar with.

http://www.koipondfever.com/p-431-matala-14-hp-aeration-kit-w-cabinet-1-diffuser.aspx

Matala 1/4 HP Aeration Kit w/ Cabinet - 1 Diffuser - $1,049.00

It includes

• 1/4 HP Compressor
• Pressure gauge & relief valve
• Air manifold
• (1) 3/8” x 100’ weighted tubing
• (1) Single air diffuser base
• Fittings & clamps


This is more than twice what you need. It produces 2.75 CFM at 20 ft and has a 2 year warranty.






Link Copied to Clipboard
Today's Birthdays
cobra01, Dan123, micam5, Rich B, woodster
Recent Posts
Prayers needed
by Zep - 04/25/24 10:36 AM
Inland Silver sided shiner
by Fishingadventure - 04/24/24 06:40 PM
1/2 Acre Pond Build
by Theo Gallus - 04/24/24 05:32 PM
Caught a couple nice bass lately...
by Dave Davidson1 - 04/24/24 03:39 PM
Happy Birthday Sparkplug!
by ewest - 04/24/24 11:21 AM
What did you do at your pond today?
by Sunil - 04/24/24 07:49 AM
What’s the easiest way to get rid of leaves
by esshup - 04/23/24 10:00 PM
Concrete pond construction
by FishinRod - 04/23/24 09:40 PM
Sealing a pond with steep slopes without liner
by FishinRod - 04/23/24 09:24 PM
Need help
by FishinRod - 04/23/24 01:49 PM
Howdy from West Central Louisiana
by FishinRod - 04/23/24 01:38 PM
Happy Birthday Theo!
by DrewSh - 04/23/24 10:33 AM
Newly Uploaded Images
Eagles Over The Pond Yesterday
Eagles Over The Pond Yesterday
by Tbar, December 10
Deer at Theo's 2023
Deer at Theo's 2023
by Theo Gallus, November 13
Minnow identification
Minnow identification
by Mike Troyer, October 6
Sharing the Food
Sharing the Food
by FishinRod, September 9
Nice BGxRES
Nice BGxRES
by Theo Gallus, July 28
Snake Identification
Snake Identification
by Rangersedge, July 12

οΏ½ 2014 POND BOSS INC. all rights reserved USA and Worldwide

Powered by UBB.threads™ PHP Forum Software 7.7.5