|
Forums36
Topics40,994
Posts558,320
Members18,519
| |
Most Online3,612
Jan 10th, 2023
|
|
|
9 members (Fishingadventure, Boondoggle, FishinRod, Zep, Brian from Texas, Sunil, tim k, dcwandj, JoshMI),
991
guests, and
277
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
Joined: Aug 2015
Posts: 4
|
OP
Joined: Aug 2015
Posts: 4 |
I have a Thomas dual head rocking piston aerator in my pond. It still works very well with good air production. It has gotten very loud though. I've replaced the seals,flappers and cylinder rings but no change. Any suggestions? It may have gotten wet, but the motor is ok and not the noise source I believe. Any help is appreciated.
|
|
|
|
|
Joined: Jun 2008
Posts: 6,980 Likes: 15
Ambassador Lunker
|
|
Ambassador Lunker
Joined: Jun 2008
Posts: 6,980 Likes: 15 |
Is it a mechanical, metal-on-metal noise? Could your air filter have developed a hole, or leak?
"Forget pounds and ounces, I'm figuring displacement!"
If we accept that: MBG(+)FGSF(=)HBG(F1)
And we surmise that: BG(>)HBG(F1) while GSF(<)HBG(F1)
Would it hold true that: HBG(F1)(+)AM500(x)q.d.(=)1.5lbGRWT?
PB answer: It depends.
|
|
|
|
|
Joined: Aug 2015
Posts: 4
|
|
OP
Joined: Aug 2015
Posts: 4 |
It's more like the metal on metal sound maybe. I've tried it with and without air filter. The sound changes but it's something else.
|
|
|
|
|
Joined: Jun 2008
Posts: 6,980 Likes: 15
Ambassador Lunker
|
|
Ambassador Lunker
Joined: Jun 2008
Posts: 6,980 Likes: 15 |
Okay, is it more or less a continuous, scraping or screeching type of noise, or a knocking sound?
"Forget pounds and ounces, I'm figuring displacement!"
If we accept that: MBG(+)FGSF(=)HBG(F1)
And we surmise that: BG(>)HBG(F1) while GSF(<)HBG(F1)
Would it hold true that: HBG(F1)(+)AM500(x)q.d.(=)1.5lbGRWT?
PB answer: It depends.
|
|
|
|
|
Joined: Aug 2015
Posts: 4
|
|
OP
Joined: Aug 2015
Posts: 4 |
|
|
|
|
|
Joined: Jun 2008
Posts: 6,980 Likes: 15
Ambassador Lunker
|
|
Ambassador Lunker
Joined: Jun 2008
Posts: 6,980 Likes: 15 |
Then I would suspect either the eccentric bearings, or more likely an interference/wear issue with the piston and cylinder head, or cylinder wall. You need to dis-assemble and look for signs of damage, or possible ingestion of foreign materials. I had a Thomas that broke the screw that holds the piston together, and while it still ran and pumped air, it was scary noisy. Did you replace the cylinders when you had it apart? If so, make sure the countersunk screws in the middle of the pistons are tight, and pulled down all the way. Also, be aware that the piston top only goes on one way.. Here is a thread that deals with a Thomas: http://forums.pondboss.com/ubbthreads.php?ubb=showflat&Number=390615afterthought...any chance you have a valve reversed?
Last edited by sprkplug; 08/13/15 01:00 PM.
"Forget pounds and ounces, I'm figuring displacement!"
If we accept that: MBG(+)FGSF(=)HBG(F1)
And we surmise that: BG(>)HBG(F1) while GSF(<)HBG(F1)
Would it hold true that: HBG(F1)(+)AM500(x)q.d.(=)1.5lbGRWT?
PB answer: It depends.
|
|
|
|
|
Joined: Aug 2015
Posts: 4
|
|
OP
Joined: Aug 2015
Posts: 4 |
Thank you for your help. I'll check it out tonight.
|
|
|
Moderated by Bill Cody, Bruce Condello, catmandoo, Chris Steelman, Dave Davidson1, esshup, ewest, FireIsHot, Omaha, Sunil, teehjaeh57
|
|
|
|
|
|
|
|
|
|
|
|
My First
by Bill Cody - 05/06/24 07:22 PM
|
|
|
|
|
|
|
|
|
|
|
|
|
|
