Forums36
Topics40,902
Posts557,128
Members18,452
|
Most Online3,612 Jan 10th, 2023
|
|
16 members (jpsdad, rjackson, esshup, Boondoggle, jbird5986, Sunil, Rick O, Angler8689, anthropic, Justin W, Bing, bstone261, DenaTroyer, Theo Gallus, Shorthose, Freg),
959
guests, and
191
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
Joined: Sep 2014
Posts: 3
|
OP
Joined: Sep 2014
Posts: 3 |
Hey guys, I'm new here, but wasn't able to find an answer to this question from a forum search, so here goes...
I recently got access to an old impoundment that was drained years ago. We have fixed the levees, but the impoundment still drains through a 12 inch pipe. Due to overgrowth and sediment buildup, it is extremely difficult to reach this drainpipe on the wet side to install any sort of standpipe... So my question is this. Would there be a way to install a standpipe on the outflow side of the drain pipe? It would be much easier to work with on that side, but of course I am worried about water building up and ultimately pushing the standpipe off...
In a nutshell, is there a way to secure a standpipe to the outflow side of a drain pipe, without fear of it popping off? Thanks!
|
|
|
|
Joined: May 2009
Posts: 5,714 Likes: 281
Lunker
|
Lunker
Joined: May 2009
Posts: 5,714 Likes: 281 |
|
|
|
|
Joined: Oct 2013
Posts: 80 Likes: 2
|
Joined: Oct 2013
Posts: 80 Likes: 2 |
What is the 12 inch drain pipe made out of? Steel, PVC? What kind of condition is it in? Is it currently carrying water?
Just an old guy who likes to fish.
|
|
|
|
Joined: Sep 2014
Posts: 3
|
OP
Joined: Sep 2014
Posts: 3 |
RAH, that would indeed work, but currently the landowner may (or may not) be changing. I plan to wait until I know for sure before investing substantial sums of money in the setup...
Lynyrd, it appears to be PVC. It does currently drain the creek/ has flow running through it. As far as I can tell there are no other areas where the impoundment is losing water. i.e. thats the only placenthat I need to partially block.
|
|
|
|
Joined: Oct 2013
Posts: 80 Likes: 2
|
Joined: Oct 2013
Posts: 80 Likes: 2 |
If it's PVC and you want to add a stand pipe, and you can't get to the inflow side, you'll probably have to deal with water while you glue it. Never used this stuff, but it might work. http://www.e-zweld.com/products/product_detail.aspx?id=MTA1Nw==
Just an old guy who likes to fish.
|
|
|
|
Joined: Sep 2014
Posts: 3
|
OP
Joined: Sep 2014
Posts: 3 |
Thanks for the reply! I will probably go ahead and give that a shot... If the force of the water backed up behind it still pops the standpipe off after gluing, back to the drawing board... But that seems like a great start
|
|
|
|
Joined: May 2009
Posts: 5,714 Likes: 281
Lunker
|
Lunker
Joined: May 2009
Posts: 5,714 Likes: 281 |
I am guessing that ice in the pipe is not a problem in your area.
|
|
|
|
Joined: Oct 2013
Posts: 6,086 Likes: 93
|
Joined: Oct 2013
Posts: 6,086 Likes: 93 |
One other thought. You said you have repaired the levees. Would it be possible to put in a new overflow pipe in another area of the impoundment, then cap the old pipe? Might be easier to eliminate the old problem altogether and work with a new overflow pipe.
Last edited by snrub; 09/18/14 11:23 AM.
John
I subscribe to Pond Boss Magazine
|
|
|
Moderated by Bill Cody, Bruce Condello, catmandoo, Chris Steelman, Dave Davidson1, esshup, ewest, FireIsHot, Omaha, Sunil, teehjaeh57
|
|