Pond Boss Magazine
https://www.pondboss.com/images/userfiles/image/20130301193901_6_150by50orangewhyshouldsubscribejpeg.jpg
Advertisment
Newest Members
Amhano8r, shores41, MidwestCass, Bucyrus22B, Steve Clubb
18,485 Registered Users
Forum Statistics
Forums36
Topics40,947
Posts557,814
Members18,486
Most Online3,612
Jan 10th, 2023
Top Posters
esshup 28,513
ewest 21,490
Cecil Baird1 20,043
Bill Cody 15,141
Who's Online Now
5 members (AlexJ, BCR Pond, Rick O, Pat Williamson, Bruno616), 727 guests, and 195 robots.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
#386226 08/29/14 08:06 AM
Joined: Feb 2011
Posts: 5,312
Likes: 300
Moderator
OP Offline
Moderator
Joined: Feb 2011
Posts: 5,312
Likes: 300
I was wondering if any of you have personal experience with backup generators? I've set a self-imposed budget of $1,000.

I've been looking at the dual fuel models because that's the fuel we currently have the most of, but we're not locked in to that. Winter's gonna bring power outages, and rarely is our power out for more than 3-4 hours.

Thanks


AL

Joined: Jun 2007
Posts: 7,099
Likes: 23
R
Ambassador
Field Correspondent
Hall of Fame
Lunker
Offline
Ambassador
Field Correspondent
Hall of Fame
Lunker
R
Joined: Jun 2007
Posts: 7,099
Likes: 23
I have 2, Al. They are both the same model with 15hp Honda GX390 clone engines. Portable gen sets are noisy! You can adapt a new-take-off rocket bike muffler onto them to eliminate exhaust noise, but the engine noise itself is just about as loud.

Mine are both 10KW peak with 8KW constant output. Mine will run the entire home, including central A/C, 26cu deep freeze, 28cu fridge, plasma TV/surround with a high end electrical filter that shuts down power if the electric feed gets dirty, spikes or drops only 2 volts...I have used my gen set many times, for hours/days at a time the past 4 years and only once did the power filter cut power due to surge/bad current feed.

Mine are also both gasoline, electric start (easy to manual start also) and reliable! Parts are cheap and readily available for the Honda clones (you just need to figure out the Honda model it's a copy of). I rarely fill my tank and run it dry after a month or so if it isn't reused so the fuel doesn't go stale. I Made a long extension cord to plug into the generator and back feed my home AFTER flipping off my main electrical breaker switch, by plugging into my 220V Dryer electrical outlet. I'd invest in an automatic feed/start switch, but just don't use the gen enough to justify the cost.

Mine was sold through Buffalo Tool's "Sportsman Tool Series" One unit is being modified to be installed on my new Live Haul truck as the main power source for AC electric needs...

I paid $549 6 years ago in a 14 day black out in the St Louis Metro area and $350 for a new return unit that cost me $25 for a NEW carb/shutoff solenoid to fix the fuel bowl leak...(Bowl gasket set was $19)

Last edited by Rainman; 08/29/14 08:31 AM.


Joined: Jun 2008
Posts: 6,979
Likes: 14
S
Ambassador
Lunker
Offline
Ambassador
Lunker
S
Joined: Jun 2008
Posts: 6,979
Likes: 14
I love the propane or natural gas units. No worries about carb issues like you get with liquid fueled versions, although gasoline IS convenient and usually easily obtainable.

I would recommend a unit with a Honda, Kawasaki, Or Briggs Vanguard engine if possible. Rainman is correct in that many oem Honda parts will fit the clone engines, but it's been my experience that it can be a pita to cross everything over, locate the part, and then hold your breath that it will fit.

As always, service after the sale is important....if you can find what you want from a local dealer, I would encourage you to purchase it there. I understand that sometimes that isn't feasible, however.

I use a generator intended for a motor home as my standby unit. They take great pains to keep them quiet, (so you don't disturb the neighbors parked right beside you), with many units being double wound so they will still produce current at 60 cycles per second, but at 1800 rpm rather than the 3600 that is more prevalent. Very quiet.

Whatever you get, institute an exercise program for the unit and stick to it. Running them every month will keep things operating smoothly, so when you need it, it's ready to go. Letting them sit without a regular schedule of operation will almost always guarantee frustration, most often at a time when you're in no mood for delays.


"Forget pounds and ounces, I'm figuring displacement!"

If we accept that: MBG(+)FGSF(=)HBG(F1)
And we surmise that: BG(>)HBG(F1) while GSF(<)HBG(F1)
Would it hold true that: HBG(F1)(+)AM500(x)q.d.(=)1.5lbGRWT?
PB answer: It depends.
Joined: Jun 2007
Posts: 7,099
Likes: 23
R
Ambassador
Field Correspondent
Hall of Fame
Lunker
Offline
Ambassador
Field Correspondent
Hall of Fame
Lunker
R
Joined: Jun 2007
Posts: 7,099
Likes: 23
Amen to what sparky said! When it came to the carb I replaced, it just happened to be the exact same manufacture unit used on true Honda engine copied.



Joined: Jul 2006
Posts: 240
V
Ambassador
Lunker
Offline
Ambassador
Lunker
V
Joined: Jul 2006
Posts: 240
Al - been a long time. Hope you are well.

After many outages we bought a Generac XG8000E for around $1,100. I found the Honda's pretty expensive for the number of times I expect to use it - but we had a budget too. We also had to run a well pump which caused us to buy larger.

I wanted to share this important point, though, that you may already know. Back-feeding a panel is dangerous for linemen if you forget to turn off your main supply. Automatic switchgear is expensive. So, enter this awesome little interlock. Mounted on the panel, it won't allow you to turn on the generator supply without turning off the main. It was an inexpensive way for me to save a linemen's life. Best of luck Brother.

Interlock Kit

Joined: Oct 2005
Posts: 6,934
Likes: 2
Ambassador
Field Correspondent
Lunker
Offline
Ambassador
Field Correspondent
Lunker
Joined: Oct 2005
Posts: 6,934
Likes: 2

Joined: Feb 2011
Posts: 5,312
Likes: 300
Moderator
OP Offline
Moderator
Joined: Feb 2011
Posts: 5,312
Likes: 300
All very good advice guys. My outdoor power shop is a certified Generac shop, so that's a big plus. I'll check all the others out soon.

So far, it's been interesting here since I posted the question. I burnt the beef tips and rice for dinner while I was talking on the phone with DD1, while at the same time trying to stalk a skunk who took up residence under the house and decided to come out in broad daylight.

Dinner's burnt, Dave's fine, skunk is dispatched.


AL

Joined: Jan 2009
Posts: 28,513
Likes: 831
Moderator
Ambassador
Field Correspondent
Lunker
Offline
Moderator
Ambassador
Field Correspondent
Lunker
Joined: Jan 2009
Posts: 28,513
Likes: 831
How's it smell around there now? A mixture of burnt rice/beef tips and Eue De Skunk?


www.hoosierpondpros.com


http://www.pondboss.com/subscribe.asp?c=4
3/4 to 1 1/4 ac pond LMB, SMB, PS, BG, RES, CC, YP, Bardello BG, (RBT & Blue Tilapia - seasonal).
Joined: Feb 2011
Posts: 5,312
Likes: 300
Moderator
OP Offline
Moderator
Joined: Feb 2011
Posts: 5,312
Likes: 300
It's been raining here all morning, so it smells like a wet mixture of burnt rice/beef tips and Eue De Skunk. Not appealing at all.


AL

Joined: Jun 2008
Posts: 6,979
Likes: 14
S
Ambassador
Lunker
Offline
Ambassador
Lunker
S
Joined: Jun 2008
Posts: 6,979
Likes: 14
Did you say....raining??


"Forget pounds and ounces, I'm figuring displacement!"

If we accept that: MBG(+)FGSF(=)HBG(F1)
And we surmise that: BG(>)HBG(F1) while GSF(<)HBG(F1)
Would it hold true that: HBG(F1)(+)AM500(x)q.d.(=)1.5lbGRWT?
PB answer: It depends.
Joined: Feb 2011
Posts: 5,312
Likes: 300
Moderator
OP Offline
Moderator
Joined: Feb 2011
Posts: 5,312
Likes: 300
Yep, nice little shower. No runoff, but the lawn and pastures got a good soaking. More supposed to come tomorrow.


AL

Joined: Feb 2011
Posts: 5,312
Likes: 300
Moderator
OP Offline
Moderator
Joined: Feb 2011
Posts: 5,312
Likes: 300
This was a tougher decision than I thought it would be. After advice given here (thanks so much), and internet info, I decided to go with either the duel fuel Sportsman Series like Rex has, or a Generac 7,500 Watt gasoline only model.

The bottom line was no generator at my price point was going to do everything I wanted. So we decided to buy a generator that could keep the freezers and refrigerators going for a day or two, and spend a little extra money to get the house wired properly. We've got a great electrician, and Victor's post about the interlock kit pretty much sealed the deal. If we pull the trigger on a whole house generator down the road, we should have all the electrical stuff ready to go. Besides, any portable generator we buy now can always be used around the farm if needed.

Thanks again guys.

Last edited by FireIsHot; 08/31/14 12:25 PM.

AL

Joined: Jan 2009
Posts: 28,513
Likes: 831
Moderator
Ambassador
Field Correspondent
Lunker
Offline
Moderator
Ambassador
Field Correspondent
Lunker
Joined: Jan 2009
Posts: 28,513
Likes: 831
Good decision. I'd at least opt for the dual fuel.


www.hoosierpondpros.com


http://www.pondboss.com/subscribe.asp?c=4
3/4 to 1 1/4 ac pond LMB, SMB, PS, BG, RES, CC, YP, Bardello BG, (RBT & Blue Tilapia - seasonal).

Link Copied to Clipboard
Today's Birthdays
April Newman, georgiaboy27, Keven
Recent Posts
Protecting Minnows
by ArkieJig - 04/19/24 11:43 PM
Major Fail
by ArkieJig - 04/19/24 11:32 PM
Muddy pond
by shores41 - 04/19/24 01:37 PM
'Nother New Guy
by teehjaeh57 - 04/19/24 01:36 PM
What’s the easiest way to get rid of leaves
by esshup - 04/19/24 09:23 AM
How many channel cats in 1/5 acre pond?
by Dave Davidson1 - 04/18/24 08:41 PM
1/4 HP pond aerator pump
by esshup - 04/18/24 06:58 PM
Hi there quick question on going forward
by Joe7328 - 04/18/24 11:49 AM
Chestnut other trees for wildlife
by Augie - 04/18/24 10:57 AM
How to catch Hybrid Striper
by Augie - 04/18/24 10:39 AM
No feed HSB or CC small pond?
by esshup - 04/18/24 10:02 AM
Newly Uploaded Images
Eagles Over The Pond Yesterday
Eagles Over The Pond Yesterday
by Tbar, December 10
Deer at Theo's 2023
Deer at Theo's 2023
by Theo Gallus, November 13
Minnow identification
Minnow identification
by Mike Troyer, October 6
Sharing the Food
Sharing the Food
by FishinRod, September 9
Nice BGxRES
Nice BGxRES
by Theo Gallus, July 28
Snake Identification
Snake Identification
by Rangersedge, July 12

� 2014 POND BOSS INC. all rights reserved USA and Worldwide

Powered by UBB.threads™ PHP Forum Software 7.7.5