Pond Boss Magazine
https://www.pondboss.com/images/userfiles/image/20130301193901_6_150by50orangewhyshouldsubscribejpeg.jpg
Advertisment
Newest Members
Amhano8r, shores41, MidwestCass, Bucyrus22B, Steve Clubb
18,485 Registered Users
Forum Statistics
Forums36
Topics40,947
Posts557,812
Members18,485
Most Online3,612
Jan 10th, 2023
Top Posters
esshup 28,513
ewest 21,490
Cecil Baird1 20,043
Bill Cody 15,141
Who's Online Now
7 members (Steve Clubb, Bobbss, phinfan, TLL, catscratch, Fishingadventure, esshup), 1,034 guests, and 226 robots.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
#148297 02/08/09 12:44 PM
Joined: Apr 2007
Posts: 26
N
Lunker
OP Offline
Lunker
N
Joined: Apr 2007
Posts: 26
Im about ready to install my system but have a question on supply pipe size. I can install the system 2 ways. One is with the compressor in my garage out of the weather or build a enclosure and place it at the ponds edge.(I have the power already there) The question is: If I place the compressor in the garage the supply line will need to be almost 300 ft long. I was wondering if 1/2 inch black poly pipe will supply my two 9 inch diffusers at that distance. If I understand it right I only need 1/2 cfm per diffuser. Also, any new ideas on weighting the supply hose in the water? I filled 2 garden hoses with sand and plan on using cable ties and attaching them to the supply pipe, unless I find something better. Thanks for your help.

Joined: Jan 2004
Posts: 969
T
Lunker
Offline
Lunker
T
Joined: Jan 2004
Posts: 969
Depends on the compressor specs ( cfm output/max psi)1/2 cfm per disc may be a minimum .they should have a range listed.The back pressure in a 300 ft 1/2 line can be fine for some compressors and too small for others.The smaller the line the more the back pressure/ the more back pressure you have the fewer available cfm's

Joined: Apr 2007
Posts: 26
N
Lunker
OP Offline
Lunker
N
Joined: Apr 2007
Posts: 26
Its 1/4 hp 220v rated 4 CFM at 0 in. Hg. Gast

Joined: Jan 2004
Posts: 969
T
Lunker
Offline
Lunker
T
Joined: Jan 2004
Posts: 969
Rotary vane (0523) ??

Joined: Apr 2007
Posts: 26
N
Lunker
OP Offline
Lunker
N
Joined: Apr 2007
Posts: 26
Yes, it is rotary vane. Its a 0522. Dont know what the difference would be.

Last edited by nashfireman; 02/08/09 04:33 PM.
Joined: Jan 2004
Posts: 969
T
Lunker
Offline
Lunker
T
Joined: Jan 2004
Posts: 969
very similar,That may be a 10 psi pump and the lower the running pressure the longer it will last.If your two discs are rated .5 cfm you have too much pump and will need to bypass some air or add diffusers.Look for a cfm range from the diffuser manufacturer.If they are rated to 2 cfm each you may be OK as long as they dont cause the back pressure to exceed the suggested top end from Gast.If you put it 300 ft away I would use an ID of at least 1 inch (bigger even better)or two lines works well too. If you mount it pondside use no less than .5 inch lines to each diffuser.You might air it up out of the water to see how much back pressure you have and then figure adding .5 psi to that reading for every foot of water depth the diffusers are in.Try to match everything up to have the lowest back pressure possible for the longest system life.

Joined: Jun 2007
Posts: 7,099
Likes: 23
R
Ambassador
Field Correspondent
Hall of Fame
Lunker
Offline
Ambassador
Field Correspondent
Hall of Fame
Lunker
R
Joined: Jun 2007
Posts: 7,099
Likes: 23
Nashfireman, spend the extra money for the self-weigted hose that Ted Lea sells. It's well worth the extra money. It's more flexable, longer life, and a WHOLE lot less hassle to move. Trust me, you WILL move it more often than you'd think!



Joined: Apr 2007
Posts: 26
N
Lunker
OP Offline
Lunker
N
Joined: Apr 2007
Posts: 26
Thanks for the help !!!

Joined: Aug 2007
Posts: 3,135
A
Ambassador
Lunker
Offline
Ambassador
Lunker
A
Joined: Aug 2007
Posts: 3,135
My personal experience with soaker hose with attached garden hose filled with sand is very flexible, and can be coiled or moved easily. Have done it many times.
If you have the money for the weighted hose it probably is a great option. My 2 cents.




Link Copied to Clipboard
Today's Birthdays
April Newman, georgiaboy27, Keven
Recent Posts
Major Fail
by Donatello - 04/19/24 01:48 PM
Muddy pond
by shores41 - 04/19/24 01:37 PM
'Nother New Guy
by teehjaeh57 - 04/19/24 01:36 PM
Protecting Minnows
by esshup - 04/19/24 09:46 AM
What’s the easiest way to get rid of leaves
by esshup - 04/19/24 09:23 AM
How many channel cats in 1/5 acre pond?
by Dave Davidson1 - 04/18/24 08:41 PM
1/4 HP pond aerator pump
by esshup - 04/18/24 06:58 PM
Hi there quick question on going forward
by Joe7328 - 04/18/24 11:49 AM
Chestnut other trees for wildlife
by Augie - 04/18/24 10:57 AM
How to catch Hybrid Striper
by Augie - 04/18/24 10:39 AM
No feed HSB or CC small pond?
by esshup - 04/18/24 10:02 AM
Newly Uploaded Images
Eagles Over The Pond Yesterday
Eagles Over The Pond Yesterday
by Tbar, December 10
Deer at Theo's 2023
Deer at Theo's 2023
by Theo Gallus, November 13
Minnow identification
Minnow identification
by Mike Troyer, October 6
Sharing the Food
Sharing the Food
by FishinRod, September 9
Nice BGxRES
Nice BGxRES
by Theo Gallus, July 28
Snake Identification
Snake Identification
by Rangersedge, July 12

� 2014 POND BOSS INC. all rights reserved USA and Worldwide

Powered by UBB.threads™ PHP Forum Software 7.7.5