Pond Boss Magazine
https://www.pondboss.com/images/userfiles/image/20130301193901_6_150by50orangewhyshouldsubscribejpeg.jpg
Advertisment
Newest Members
Shotgun01, Dan H, Stipker, LunkerHunt23, Jeanjules
18,451 Registered Users
Forum Statistics
Forums36
Topics40,899
Posts557,071
Members18,451
Most Online3,612
Jan 10th, 2023
Top Posters
esshup 28,411
ewest 21,474
Cecil Baird1 20,043
Bill Cody 15,110
Who's Online Now
17 members (Bob Lusk, LeighAnn, Shorthose, catscratch, Justin W, Requa, Freg, DenaTroyer, Blestfarmpond, Snipe, RAH, Rick O, bstone261, Theo Gallus, esshup, jpsdad, Bing), 775 guests, and 186 robots.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Page 1 of 2 1 2
#129796 08/19/08 11:26 AM
Joined: Nov 2007
Posts: 110
J
JMAC Offline OP
Lunker
OP Offline
Lunker
J
Joined: Nov 2007
Posts: 110
Ive got a pond with a secchi of about .3 ft (planktonic algae). Keep in mind were in michigan and we like our water to have a secchi of about a mile. (I try to tell folks to keep a little algae, but they want swimming pools) Total Phosphorus in the pond is 1.19, nitrates are .6 and nitrites are .01. Im assuming we have a phosphorus issue. Now where do I go from here? The pond is 4 acres X 4ft deep avg and aerated with a 6 plate system (2 3/4hp rotary vane). Am I under aerated or should I look at Alum?


Justin McLeod
If you don't know where to start, go back to the beginning.

jmcleod@thepondguy.com
http://www.thepondguy.com

JMAC #129804 08/19/08 12:46 PM
Joined: Mar 2005
Posts: 21,474
Likes: 264
E
Moderator
Hall of Fame 2014
Lunker
Offline
Moderator
Hall of Fame 2014
Lunker
E
Joined: Mar 2005
Posts: 21,474
Likes: 264
What do you want to do/accomplish ?
















ewest #129833 08/19/08 04:41 PM
Joined: Nov 2007
Posts: 110
J
JMAC Offline OP
Lunker
OP Offline
Lunker
J
Joined: Nov 2007
Posts: 110
we're looking for clear water, no algae, more or less no plants.


Justin McLeod
If you don't know where to start, go back to the beginning.

jmcleod@thepondguy.com
http://www.thepondguy.com

JMAC #129834 08/19/08 04:47 PM
Joined: Mar 2005
Posts: 21,474
Likes: 264
E
Moderator
Hall of Fame 2014
Lunker
Offline
Moderator
Hall of Fame 2014
Lunker
E
Joined: Mar 2005
Posts: 21,474
Likes: 264
What about fish ? I don't think alum used as intended will be an answer to plankton density. It will help knock out some of the suspended solids.
















ewest #129891 08/20/08 06:44 AM
Joined: Nov 2007
Posts: 110
J
JMAC Offline OP
Lunker
OP Offline
Lunker
J
Joined: Nov 2007
Posts: 110
I thought that alum bound up a good amount of phosphorus, which is what I think the problem is. Fish are not really a goal, just innocent bystanders in this one.


Justin McLeod
If you don't know where to start, go back to the beginning.

jmcleod@thepondguy.com
http://www.thepondguy.com

JMAC #129905 08/20/08 09:18 AM
Joined: Mar 2005
Posts: 21,474
Likes: 264
E
Moderator
Hall of Fame 2014
Lunker
Offline
Moderator
Hall of Fame 2014
Lunker
E
Joined: Mar 2005
Posts: 21,474
Likes: 264
It can but it does not bind up the P in the soil. There are possible sewer treatment products that may do that but I have not heard of anyone doing that to a pond bottom and watershed. Have you had the soil tested ? If there has been no fertilization then I assume the P source is the dirt. I also am not sure about the long term reabsobshion of the initially bound P out of the alum/P bond by the more acid water due to treatment.

I would want to know for sure if the P is high from a soil test before I started spending $ on alum and what the long term effect would be.
















ewest #130023 08/21/08 09:45 AM
Joined: Nov 2007
Posts: 110
J
JMAC Offline OP
Lunker
OP Offline
Lunker
J
Joined: Nov 2007
Posts: 110
P - tests in the past have not shown outrageously high amounts, just this summer. I suspect that the lower than normal rainfall last year and the much higher than normal rainfall this year has created a large influx of P from the watershed (lots of fertilized lawns). This pond is also linked to several other ponds in the community, so I believe that it is a cumulative effect.

How can I test the soil? Are those diy garden tests sufficient or should I send it in?


Justin McLeod
If you don't know where to start, go back to the beginning.

jmcleod@thepondguy.com
http://www.thepondguy.com

JMAC #130027 08/21/08 10:04 AM
Joined: Mar 2005
Posts: 21,474
Likes: 264
E
Moderator
Hall of Fame 2014
Lunker
Offline
Moderator
Hall of Fame 2014
Lunker
E
Joined: Mar 2005
Posts: 21,474
Likes: 264
If you know you will have runoff from fertilized lawns and it is likely to keep occurring then it will be very hard to limit the incoming nutrients. I don't think in that case the constant adding of alum to the pond will be efficient or work well. That leaves 2 approaches. One treat with something to kill or limit the plankton (as fish are a small concern) or two look into one of the waste water/landfill products to bond P to the soil over a large area. May be others I am missing.


From the archives - Soil & Water test links

Soil Test Laboratories in Michigan
Soil & Plant Nutrient Lab
Michigan State University
Plant & Soil Sciences Building, Rm. A-81
East Lansing, MI 48824-1325
(517) 355-0218
Although you can send your soil sample directly to the lab, your best bet is to contact your local extension office to obtain a soil collection kit and fee schedule. (The lab will direct you to your local extension office if necessary.) Your soil test results will be sent to your extension office.






Last edited by ewest; 08/21/08 10:05 AM.















ewest #130032 08/21/08 11:05 AM
Joined: Jan 2004
Posts: 969
T
Lunker
Offline
Lunker
T
Joined: Jan 2004
Posts: 969
Justin,As far as under aerated when you say 6 plate system are you using 6 plates of 4 stones such as ALA4GL or the 6 per plate ALA6GL ? If 4 stone plates are being used (and Im going to make some general assumptions so correct me where needed)you may be under aerated, If you have 20 available CFM and 3.33 cfm per station you may want to add some additional diffusers. I believe the operating range for the 4 plate is somewhere around 2.4 cfm max.which means you could add 2-3 additional plates if you stay with that model.This is also assuming the pumps are 10 psi models and not 15 psi models which provide less cfm's.Your total lift which is probably in the 1.3- 1.6 turns per 24 hours may be fine but all of the gallons probably arent being effected since you have shallow water.Im using diffusers in 6 ft minimum depth of water .Also if these are square stones turn them on "edge" on the plate to expose more of the total surface area vs the way I usually see them mounted flat with only 75% (3 sides) exposed.Is Hydrothol 191 out of the question for the goals listed ??I also thought Michigan had gone to a zero "P" in the lawn care industry.

Joined: Nov 2007
Posts: 110
J
JMAC Offline OP
Lunker
OP Offline
Lunker
J
Joined: Nov 2007
Posts: 110
Commercially I think the zero P is common, but individual homeowners still load up on the P. They are 4 stone plates. Have you had good results with Hydrothol 191? I like it but usually can't use it due to irrigation restrictions so I don't have much experience with it for Planktonic.

Do you have any links for the math behind aeration installs?


Justin McLeod
If you don't know where to start, go back to the beginning.

jmcleod@thepondguy.com
http://www.thepondguy.com

JMAC #130044 08/21/08 01:13 PM
Joined: Jan 2004
Posts: 969
T
Lunker
Offline
Lunker
T
Joined: Jan 2004
Posts: 969
Im sure your correct on the commercial P and tough to police homeowners. Perhaps costs of fertilizer for next year will curb some of it as my cost has doubled since last November.I realize many Lowes type stores will always use it as a lost leader type product but I see they too are offering P free.When I have swimming pool goals with an occasional fish thrown in I do use 191 and like it. Shallow water ponds are still my most difficult but I find turns that are one plus usually disturb planktonic algae formation,this is why you may be able to add plates if you have area or pockets that are not being effected by aeration. Knowing that it takes very litle available P to have planktonic algae I think anything you do may only be a temp solution.What type of math are you referring to on the installs

Joined: Nov 2007
Posts: 110
J
JMAC Offline OP
Lunker
OP Offline
Lunker
J
Joined: Nov 2007
Posts: 110
So hydrothol 191 keeps planktonic down well, even in large lakes? Cost is a big issue on this one, but I'll do it if it works. I like it in small ponds and trout/koi ponds. I'm gathering from my research that locking up the phosphorus is about out of the question. Math-wise i just like seeing any differing views to hopefully learn more. Just want any sites or info for calculating systems


Justin McLeod
If you don't know where to start, go back to the beginning.

jmcleod@thepondguy.com
http://www.thepondguy.com

JMAC #130060 08/21/08 03:00 PM
Joined: Jan 2004
Posts: 969
T
Lunker
Offline
Lunker
T
Joined: Jan 2004
Posts: 969
I would test 191 on a small inhouse basis to see if it meets your need, as yes its costly. If any irrigation needed I would not trust the restriction guide,if you irrigate do not use would be my policy.I have the same policy on Sonar as it is difficult to get it to test to safe levels,you then also have to consider landscape plants for which tests probably have not been done.Ill see if Sue at Vertex has a file she can post on the testing and lift data for their systems for an example. I have the test results on our site under "A word about diffusers" Ill see if she will do a sample of a 4 acre lake with a 6 ft average depth and a desired turn of twice per day (for information purposes) not trying to advertise . If the moderators would rather this be PM'd to you we can do that too.

Joined: Mar 2005
Posts: 21,474
Likes: 264
E
Moderator
Hall of Fame 2014
Lunker
Offline
Moderator
Hall of Fame 2014
Lunker
E
Joined: Mar 2005
Posts: 21,474
Likes: 264
Depending on the situation I have used the following as an emergency method to reduce planktonic algae that was to dense.

Take a 5 gal bucket and put a hand full (estimate 4-6 ozs) of CUSO4 in the bucket add 3 gal of water and stir until dissolved. This produces blue water. Take a hand sprayer (3 gal) and add the blue water 1/8 and clean water 7/8 to fill. Spray from boat lightly over about 15% of the surface area in parts. For example small areas of about 3% in 5 different areas leaving untreated areas in-between. It has when used reduced my plankton densities by about 40% on a temporary basis. It does carry a high risk and you have the potential for CU accumulation in the system (bottom muds).

This is my last ditch emergency plankton reduction method. I am not sure what the effect of doing this with aeration ongoing would be.
















ewest #130319 08/25/08 02:26 PM
Joined: Nov 2007
Posts: 110
J
JMAC Offline OP
Lunker
OP Offline
Lunker
J
Joined: Nov 2007
Posts: 110
I've been using CuSO4 to knock it back with short term results. Is there any way to convince someone that planktonic is healthy for a pond? It would be much easier if folks would agree that green, productive water is much better (and easier to maintain)than crystal clear swimming pool water. Sometimes.... I'd like to throw things.


Justin McLeod
If you don't know where to start, go back to the beginning.

jmcleod@thepondguy.com
http://www.thepondguy.com

JMAC #130321 08/25/08 02:55 PM
Joined: Mar 2005
Posts: 21,474
Likes: 264
E
Moderator
Hall of Fame 2014
Lunker
Offline
Moderator
Hall of Fame 2014
Lunker
E
Joined: Mar 2005
Posts: 21,474
Likes: 264
I feel your pain and frustration. No magic suggestions on that one. \:\(
















ewest #130325 08/25/08 03:45 PM
Joined: Nov 2007
Posts: 110
J
JMAC Offline OP
Lunker
OP Offline
Lunker
J
Joined: Nov 2007
Posts: 110
But the answer is in your words--MAGIC. We always keep a pail of it in our trucks, just incase someone needs it! You want your duckweed gone today? I'll get out the magic! You have one weed growing after I killed 99% of the weeds in your pond? No problem sir, I've got magic with me today. lol, But I Digress.....


Justin McLeod
If you don't know where to start, go back to the beginning.

jmcleod@thepondguy.com
http://www.thepondguy.com

JMAC #130365 08/26/08 01:57 AM
Joined: Jun 2007
Posts: 7,099
Likes: 22
R
Ambassador
Field Correspondent
Hall of Fame
Lunker
Offline
Ambassador
Field Correspondent
Hall of Fame
Lunker
R
Joined: Jun 2007
Posts: 7,099
Likes: 22
Jmac, the alum may be your cheapest swag at the problem. It will bind the P and should also floc most of the planktonic from the water.



Rainman #130385 08/26/08 08:04 AM
Joined: Oct 2005
Posts: 1,285
Likes: 1
R
Lunker
Offline
Lunker
R
Joined: Oct 2005
Posts: 1,285
Likes: 1
I'm going to throw something out here since it appears to be the root of this problem.

I'm guilty of fertilizing my lawn. Go ahead and shoot me. I like green grass and the healthier it is the less weeds I have to kill. I tried several brands and kinds of fertilizer with a wide range of effects. One , 15/15/20 mix from the grainery caused nearly flourescent green streaks in the water almost imediately after a rain. Other types simply made my grass grow like crazy.

Currently I'm using something that starts with an Sc and ends with ott's. It's their cheaper line and has 2% iron too. It's 29-3-4 and slow release. I have had no problems and almost no weeds in the pond even though I fertilize right up to the edge (a slightly lower rate around the pond). It keeps the grass nice and green and doesn't seem to need to be mowed more then unfertilized lawns.

Maybe you're neighbors need some encouragement to simply change brands or suppliers. I'm curious if most of your neighbors are receiving their treatments by spray from the back of a truck. I haven't been too impressed by the spray truck guys I've encountered or their products and "professional" granular application is often a competitively priced alternative.



Last edited by Ryan Freeze; 08/26/08 08:15 AM.



"The greatest enemy of knowledge is not ignorance, it is the illusion of knowledge." Stephen W. Hawking
Joined: Mar 2004
Posts: 2,435
R
Ambassador
Hall of Fame 2014
Lunker
Offline
Ambassador
Hall of Fame 2014
Lunker
R
Joined: Mar 2004
Posts: 2,435
Ryan, that is some great looking grass. Are those cows yours too?


Just do it...
rmedgar #130405 08/26/08 10:35 AM
Joined: Oct 2005
Posts: 1,285
Likes: 1
R
Lunker
Offline
Lunker
R
Joined: Oct 2005
Posts: 1,285
Likes: 1
Thanks rmedgar. The cows belong to my neighbor, they're a constant source of entertainment. My brother lives in the homestead, he has longhorns.




"The greatest enemy of knowledge is not ignorance, it is the illusion of knowledge." Stephen W. Hawking
Joined: May 2004
Posts: 13,938
Likes: 268
Moderator
Lunker
Online Confused
Moderator
Lunker
Joined: May 2004
Posts: 13,938
Likes: 268
Fertilize the yard, not the pasture. What a concept ...


"Live like you'll die tomorrow, but manage your grass like you'll live forever."
-S. M. Stirling
[Linked Image from i.pinimg.com]
Joined: Oct 2005
Posts: 1,285
Likes: 1
R
Lunker
Offline
Lunker
R
Joined: Oct 2005
Posts: 1,285
Likes: 1
Theo, I heard you cock your hammer clear over hear in Plain City right after I clicked the the post button.




"The greatest enemy of knowledge is not ignorance, it is the illusion of knowledge." Stephen W. Hawking
Joined: May 2004
Posts: 13,938
Likes: 268
Moderator
Lunker
Online Confused
Moderator
Lunker
Joined: May 2004
Posts: 13,938
Likes: 268
RTOFLOL!


"Live like you'll die tomorrow, but manage your grass like you'll live forever."
-S. M. Stirling
[Linked Image from i.pinimg.com]
Joined: May 2008
Posts: 87
J
Lunker
Offline
Lunker
J
Joined: May 2008
Posts: 87
Hi guys: Theo suggested that I bring this to forum, and since fertilization has some what of an effect on ph an alkalinity here goes: My new pond (5-08) has a very hard, clay bottom and the run off comes from rocky, redish soil. We have a normal amount of alge, etc with some water plants beginning to appear. Haven't stocked it yet, and won't till water temp get about 70-74 this fall. My Ph at 3:00 pm yesterday was 9.3 and my alkalinity was 60 ppm. I think I'd like by alk. to be about 100-125 ppm and my Ph between 7-8.5. I know the Ph is a moving target depending on time of day and other factors. Should I be worried about 9.3Ph at mid day, and if I use pelletizied lime to up my alk. would it totally spike my Ph and fry anything living in the water. I'm not adversed to using small amounts of muratic acid to help the Ph process, but I'd really like some "expert" input. Thanks guys. Jimmydee

Page 1 of 2 1 2

Link Copied to Clipboard
Today's Birthdays
Bob Lusk, GaryK, GrizzFan, PhotographerDave
Recent Posts
Brooder Shiners and Fry, What to do??
by Freg - 03/28/24 09:42 AM
Alum vs Bentonite/Lathanum for Phosphorus Removal?
by DenaTroyer - 03/28/24 09:38 AM
Happy Birthday Bob Lusk!!
by esshup - 03/28/24 08:45 AM
Relative weight charts in Excel ? Calculations?
by esshup - 03/28/24 08:36 AM
Dewatering bags seeded to form berms?
by Justin W - 03/28/24 08:19 AM
Reducing fish biomass
by FishinRod - 03/28/24 08:18 AM
New 2 acre pond stocking plan
by esshup - 03/27/24 06:05 PM
1 year after stocking question
by esshup - 03/27/24 06:02 PM
Questions and Feedback on SMB
by Donatello - 03/27/24 03:10 PM
Paper-shell crayfish and Japanese snails
by Bill Cody - 03/27/24 10:18 AM
2024 North Texas Optimal BG food Group Buy
by Dave Davidson1 - 03/27/24 08:15 AM
Freeze Danger? - Electric Diaphragm Pump
by esshup - 03/26/24 09:47 PM
Newly Uploaded Images
Eagles Over The Pond Yesterday
Eagles Over The Pond Yesterday
by Tbar, December 10
Deer at Theo's 2023
Deer at Theo's 2023
by Theo Gallus, November 13
Minnow identification
Minnow identification
by Mike Troyer, October 6
Sharing the Food
Sharing the Food
by FishinRod, September 9
Nice BGxRES
Nice BGxRES
by Theo Gallus, July 28
Snake Identification
Snake Identification
by Rangersedge, July 12

� 2014 POND BOSS INC. all rights reserved USA and Worldwide

Powered by UBB.threads™ PHP Forum Software 7.7.5