Pond Boss Magazine
https://www.pondboss.com/images/userfiles/image/20130301193901_6_150by50orangewhyshouldsubscribejpeg.jpg
Advertisment
Newest Members
Shotgun01, Dan H, Stipker, LunkerHunt23, Jeanjules
18,451 Registered Users
Forum Statistics
Forums36
Topics40,902
Posts557,116
Members18,452
Most Online3,612
Jan 10th, 2023
Top Posters
esshup 28,420
ewest 21,475
Cecil Baird1 20,043
Bill Cody 15,112
Who's Online Now
1 members (anthropic), 750 guests, and 227 robots.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Joined: Sep 2009
Posts: 132
Lunker
OP Offline
Lunker
Joined: Sep 2009
Posts: 132
In an earlier post on the "Selecting a site" forum I described the 1-acre bluegill/bass pond I am constructing. The plan was to have the depth drop immediately to about two feet, slope to about 3 feet over the next 10 feet, and then drop again quickly to about 6 feet and to 8-9 feet in the deepest area. I'm thinking about changing this to add some more structure on the west side of the pond, where the contractor has not yet finished digging. That section is shown here, looking across from the east side.

My wife and my dog are just beyond the water line near the base of the tree.

Another view of the same area looking back east from behind the tree illustrates what I am thinking about doing. The water line is in light blue, and the existing ledge at about three feet is in magenta.

What I have in mind is to dig out a deeper area in the middle, leaving a shallow underwater peninsula on the left and an island on the right. This would give a deep channel that runs near the shallow areas and passes close to the bank in front of the tree and to the deepest area near the dam. This would be partly to give a deeper diving area near the bank, but I am wondering if this structure would also be beneficial for habitat.
Another view of the same area from the north is here:


My son also suggested adding a narrow deeper channel where the original creek bed was. And we plan to add some other structure after the contractor finishes his work.

I wish I had found this forum before we ever started, but I guess making changes would be better now than later. Any suggestions on either the overall plan or the changes I am considering would be greatly appreciated.

Thanks,
Charlie

Joined: Mar 2005
Posts: 21,475
Likes: 264
E
Moderator
Hall of Fame 2014
Lunker
Offline
Moderator
Hall of Fame 2014
Lunker
E
Joined: Mar 2005
Posts: 21,475
Likes: 264
Depth changes , islands , cuts , points , ditches ect are all good structure ideas. In flats in 3 ft of water make BG beds.

Last edited by ewest; 09/05/09 08:22 PM.















Joined: Aug 2002
Posts: 20,043
Likes: 1
Hall of Fame
Lunker
Offline
Hall of Fame
Lunker
Joined: Aug 2002
Posts: 20,043
Likes: 1
Charlie,

Looks like you've put a lot of thought into this. Thanks for sharing! \:\)


If pigs could fly bacon would be harder to come by and there would be a lot of damaged trees.






Joined: May 2004
Posts: 13,939
Likes: 268
Moderator
Lunker
Offline
Moderator
Lunker
Joined: May 2004
Posts: 13,939
Likes: 268
It looks like the (submerged) island will be within easy casting distance of the shore. I think you will like that for fishing.

Last edited by Theo Gallus; 09/05/09 09:33 PM.

"Live like you'll die tomorrow, but manage your grass like you'll live forever."
-S. M. Stirling
[Linked Image from i.pinimg.com]
Joined: Mar 2005
Posts: 21,475
Likes: 264
E
Moderator
Hall of Fame 2014
Lunker
Offline
Moderator
Hall of Fame 2014
Lunker
E
Joined: Mar 2005
Posts: 21,475
Likes: 264
BG beds on the island will work well. BG fishing on the beds and LMB fishing in deeper water just off the beds (LMB wait there to ambush BG as the BG come and go).
















Joined: Sep 2009
Posts: 132
Lunker
OP Offline
Lunker
Joined: Sep 2009
Posts: 132
We have finished digging the pond, and the island now looks like this:

The island is about 25 feet x 20 feet and should be about 3 feet deep. Right now the surface is firm clay. The underwater peninsula is similar, but its depth varies from about 2 feet to 3 feet.

Now I am trying to decide whether to leave the surfaces as they are or add some sand or pea gravel. I would appreciate any advice on whether either of these is worthwhile, and if so, what would be the best approach.

Joined: Nov 2004
Posts: 1,074
O
Lunker
Offline
Lunker
O
Joined: Nov 2004
Posts: 1,074
Love the island. It looks great.

Joined: Dec 2008
Posts: 4,791
Likes: 14
O
Moderator
Ambassador
Field Correspondent
Lunker
Offline
Moderator
Ambassador
Field Correspondent
Lunker
O
Joined: Dec 2008
Posts: 4,791
Likes: 14
 Originally Posted By: FarmerCharlie
Now I am trying to decide whether to leave the surfaces as they are or add some sand or pea gravel. I would appreciate any advice on whether either of these is worthwhile, and if so, what would be the best approach.


FC, from everything I've been told and read, I believe your BG will spawn regardless if you lay down pea gravel or not so it might just be unnecessary work for you. But refer to the note below my signature and let someone else tell you for sure. ;\)

Joined: Mar 2005
Posts: 21,475
Likes: 264
E
Moderator
Hall of Fame 2014
Lunker
Offline
Moderator
Hall of Fame 2014
Lunker
E
Joined: Mar 2005
Posts: 21,475
Likes: 264
I agree that the BG will spawn without making these. However the success of spawning will improve with gravel and just as importantly you will encourage them to spawn where you want them (so you know where to watch and fish).
I would make this on top of the island and down the point. I would use rock (not pea gravel) and no sand and make the impression with the back of a shovel. Then add about a half shovel of rock per bed.








This is a RES but gives an idea of what a bed should look like

















Joined: Sep 2009
Posts: 132
Lunker
OP Offline
Lunker
Joined: Sep 2009
Posts: 132
 Originally Posted By: ewest

I would make this on top of the island and down the point.

Great pictures. I sure would like to get that beautiful shell cracker on my fly rod. \:\)
Do you do the construction before or after the pond fills? Right now the clay surface on the island is so firm that it would take some digging to make the depressions. The peninsula surface is a little softer.
Another question: I have access to limestone or granite driveway gravel. Would one of these be suitable?

Joined: May 2004
Posts: 13,939
Likes: 268
Moderator
Lunker
Offline
Moderator
Lunker
Joined: May 2004
Posts: 13,939
Likes: 268
Working on a pond bottom is much easier before it fills.

Gravel type should not matter to the fish. Limestone would have the bonus of adding very slightly to the calcium content of the pond. This is almost always a benefit.


"Live like you'll die tomorrow, but manage your grass like you'll live forever."
-S. M. Stirling
[Linked Image from i.pinimg.com]

Link Copied to Clipboard
Today's Birthdays
cro, HC1968
Recent Posts
Relative weight charts in Excel ? Calculations?
by esshup - 03/29/24 01:06 AM
pond experience needed
by esshup - 03/29/24 12:45 AM
New pond middle TN: establishing food chain?
by Bill Cody - 03/28/24 07:57 PM
Happy Birthday Bob Lusk!!
by FireIsHot - 03/28/24 07:33 PM
Working on a .5acre disaster, I mean pond.
by PRCS - 03/28/24 06:39 PM
Fungus infection on fish
by nvcdl - 03/28/24 06:07 PM
Can anyone ID these minnows?
by Dylanfrely - 03/28/24 05:43 PM
1 year after stocking question
by esshup - 03/28/24 04:48 PM
Yellow Perch Spawn 2024
by H20fwler - 03/28/24 04:29 PM
New 2 acre pond stocking plan
by LANGSTER - 03/28/24 03:49 PM
Paper-shell crayfish and Japanese snails
by esshup - 03/28/24 10:39 AM
Newly Uploaded Images
Eagles Over The Pond Yesterday
Eagles Over The Pond Yesterday
by Tbar, December 10
Deer at Theo's 2023
Deer at Theo's 2023
by Theo Gallus, November 13
Minnow identification
Minnow identification
by Mike Troyer, October 6
Sharing the Food
Sharing the Food
by FishinRod, September 9
Nice BGxRES
Nice BGxRES
by Theo Gallus, July 28
Snake Identification
Snake Identification
by Rangersedge, July 12

� 2014 POND BOSS INC. all rights reserved USA and Worldwide

Powered by UBB.threads™ PHP Forum Software 7.7.5