Forums36
Topics41,058
Posts559,017
Members18,563
|
Most Online3,612 Jan 10th, 2023
|
|
|
Joined: May 2014
Posts: 3,867 Likes: 301
|
OP
Joined: May 2014
Posts: 3,867 Likes: 301 |
Set up a brand new TH feeder a couple of weeks ago, and was surprised to hear it make a loud clattering sound when it went off. Thought it might need a break in period, but the sound persists, and the pellet output is notably feeble compared with my other feeders. Throws out maybe half to one third in the same amount of time, and distance is much decreased, too.
Anybody else have this issue? Is it common with new TH feeders? First time I've seen this problem. Is this an unlucky fluke, or the result of a change in manufacturing on their part?
Last edited by anthropic; 07/09/21 01:55 AM.
7ac 2015 CNBG RES FHM 2016 TP FLMB 2017 NLMB GSH L 2018 TP & 70 HSB PK 2019 TP RBT 2020 TFS TP 25 HSB 250 F1,L,RBT -206 2021 TFS TP GSH L,-312 2022 GSH TP CR TFS RBT -234, 2023 BG TP TFS NLMB, -160
|
|
|
|
Joined: Aug 2014
Posts: 3,959 Likes: 188
|
Joined: Aug 2014
Posts: 3,959 Likes: 188 |
Suggest looking at down spout inside and make sure something isn’t hung up
|
|
|
|
Joined: Feb 2011
Posts: 5,326 Likes: 307
Moderator
|
Moderator
Joined: Feb 2011
Posts: 5,326 Likes: 307 |
I agree with Pat, check that first. Food can get lodged in the down spout, and slow things down. Easiest way to clear it is to unplug the spinner and do test throws as you shake the feeder.
Anthropic, what size pellets were in the new feeder?
AL
|
|
|
|
Joined: Aug 2014
Posts: 3,959 Likes: 188
|
Joined: Aug 2014
Posts: 3,959 Likes: 188 |
As with all feeds sometimes you find a range cube or some kind of hitchhiker that will plug up the works. What’s nice about the TH feeder is you can take the side panel off and take a peek
|
|
|
|
Joined: Oct 2018
Posts: 2,268 Likes: 554
|
Joined: Oct 2018
Posts: 2,268 Likes: 554 |
I've spent a bit of time fine-tuning mine but no expert.. esshup can better explain, he's quite the feeder tech on these.
|
|
|
|
Joined: Jan 2009
Posts: 28,663 Likes: 884
Moderator Ambassador Field Correspondent Lunker
|
Moderator Ambassador Field Correspondent Lunker
Joined: Jan 2009
Posts: 28,663 Likes: 884 |
Set up a brand new TH feeder a couple of weeks ago, and was surprised to hear it make a loud clattering sound when it went off. Does it make this noise when there is no feed in the feeder and it goes through a "throw" cycle? Like Al said, what size pellets are you throwing? How far is the bottom of the spin plate set from the bottom of the hopper?
|
|
|
Moderated by Bill Cody, Bruce Condello, catmandoo, Chris Steelman, Dave Davidson1, esshup, ewest, FireIsHot, Omaha, Sunil, teehjaeh57
|
|