Forums36
Topics41,059
Posts559,026
Members18,564
|
Most Online3,612 Jan 10th, 2023
|
|
12 members (gr8texan, Don Kennedy, Theo Gallus, jludwig, Shorthose, Theeck, catscratch, Boondoggle, Thirdy8special, robc, Ranchboss, SCFarms),
781
guests, and
385
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
Joined: Jul 2017
Posts: 2
|
OP
Joined: Jul 2017
Posts: 2 |
Unfortunately there are no wastewater techs alive in my area anymore so I'm stuck with an "eminent domain" as soon as your lagoon fails situation, and no help. I've been reading like mad. They won't let us tie into the city sewer because they want a pretty field next to the road instead of the building that has been there since 1968.
There are two ponds. Both fed by a large 220v high volume air pump, 1.5 inch pipe and a homemade octagonal diffuser in each pond. These ponds are probably 40x70' and about 6' deep. The aerator in the ponds are at the surface Shouldn't the aerator be on the bottom???? These only have 8 holes in each diffuser. I would expect a large number of small holes. I also suspect that the main pond (other is an overflow), should have 2 diffusers since it is a wastewater lagoon fed by a large 5 section septic tank system. The main pond is failing and I am removing cattails and I found pieces of yet another diy aerator built like a ladder. This one appears to have been original and is anchored rather high!! Suggestions?? I'll have to make another diy diffuser system. How big and how many million holes do I need to drill? ..
Fyi The 5 tank septic has a massive air pump feeding a simple 1.5" pipe into each section. No diffusion at all. I have to redo the piping due to wear holes, should it get like a diffuser cap. A 1.5" cap drilled with tiny holes??
Any guidance or direction to diy designs for this would really help. I'm drowning in $$$$ solutions and scientific info and not enough real world basic knowledge. I cant even find someone who knows how to test the water or what test kit to buy to check the health of the system. TIA
|
|
|
|
Joined: Jul 2017
Posts: 2
|
OP
Joined: Jul 2017
Posts: 2 |
On a side note... It's scary that there are no wastewater lagoon techs near me. This would seem like something the wise would know about as you will need to use a lagoon if things go "south". I guess I'm going to have to become one of those guys who learns "the old way" for when the status quo fails. Not one drain or plumbing company in my area has any knowledge of these systems! I know its not a nice fish pond, but I figure some of you guys know something about these lagoons. Grateful for any practical knowledge, thanks.
|
|
|
|
Joined: Jan 2009
Posts: 28,663 Likes: 884
Moderator Ambassador Field Correspondent ![](images/stars.gif) Lunker
|
Moderator Ambassador Field Correspondent ![](images/stars.gif) Lunker
Joined: Jan 2009
Posts: 28,663 Likes: 884 |
Maybe take a trip here and talk to the techs there? http://www.fcgov.com/utilities/what-we-do/wastewater
|
|
|
|
Joined: Jun 2012
Posts: 2,058 Likes: 7
|
Joined: Jun 2012
Posts: 2,058 Likes: 7 |
Is this for a single family home?
Could it have been designed as a reed bed?
|
|
|
|
Joined: Jun 2007
Posts: 7,099 Likes: 23
Ambassador Field Correspondent Hall of Fame ![](images/stars.gif) Lunker
|
Ambassador Field Correspondent Hall of Fame ![](images/stars.gif) Lunker
Joined: Jun 2007
Posts: 7,099 Likes: 23 |
I hate to say it, but your "aeration" sounds like a complete mess and is doing nothing properly, except burn a LOT of electricity. A lagoon does not even need aeration if the load is small, but things happen faster with proper aeration. 6 foot depth in the main ponds is too shallow for bottom membrane diffusers, but runs of hose can help. A surface agitator or two is probably best with the shallow water. Here are 2 links...The first is on proper lagoon design and the second is a company that sells diffusers designed specifically for waste water treatment...... http://extension.missouri.edu/p/WQ402http://www.wastewater.com/parts
|
|
|
|
Joined: Jun 2019
Posts: 1
|
Joined: Jun 2019
Posts: 1 |
OP, where are you based? If you are in the VA area, particularly near Mechanicsville we may be able to assist.
|
|
|
Moderated by Bill Cody, Bruce Condello, catmandoo, Chris Steelman, Dave Davidson1, esshup, ewest, FireIsHot, Omaha, Sunil, teehjaeh57
|
|