[quote=Bill Cody]Is your 3-way splitter underwater?. If yes, I do not recommend this. Usually each diffuser needs a separate valve at the manifold to control, adjust and regulate air flow to the diffuser. Diffusers at shallower depths will want to take air flow away from the deeper diffusers due to less head pressure at the shallowest diffuser. The shallowest diffuser wants all the air volume.
Yes my splitter would be under water. The flow valve would also be underwater just before the diffuser. Hose/Valve/Diffuser The reasoning would be to minimize the cost of each run. If I created a run from the waters edge to the furthest finger placement it would be a 300ft run under water. That is a lot of cost for weighted hose that I'm trying to get away from.
