retainer=dam, check on the terminology correction..
the Dingo is totally animal, but yes, it weighs just short of two tons.....the two tricks you have to know are:
1) to learn to weld cast iron, if you don't already; and build up the outsides of the track guide tips, then grind the inside of the tips, reinstall, and maintain track assemblage as per usual.
2) don't get lazy and lock your knees back, or it will hurt you bad...keep your knees bent and think moto-cross; it more like moto-cross than your typical carny ride at the fair grounds..
i have a 4 foot box scrapper coming.
i did remove the topsoil prior to building up the dam, but i am certain at least half of the dam's foot lapped over the peripheral top soil....will check for water, think about sheepsfoot vs. bentonite, and take picktures..
thanks all,
rulg
