MN,
I am writing an article for Bob, and I'll be doing a few videos on the system. Like Scott said, its an hour and a half from PBC, but if you show up, you will likely be put to work as well!!
Cecil,
I am running an airlift only system now and it does not require very much power. With that said, I over paneled for the heaters.
I am running a 24 volt system for now and i am making enough power for this setup.
Gird power is also available if needed, but the plan is to be power independent for these systems.
Scott,
if they come, they work and learn!!!!
