Forums36
Topics41,061
Posts559,037
Members18,564
|
Most Online3,612 Jan 10th, 2023
|
|
|
Joined: Jan 2009
Posts: 28,664 Likes: 884
Moderator Ambassador Field Correspondent Lunker
|
Moderator Ambassador Field Correspondent Lunker
Joined: Jan 2009
Posts: 28,664 Likes: 884 |
Drill 1/8" or 3/16" holes in the bottom, and about 1/4 the way down from the top of the cage. That lets out the air at the bottom, but keeps some in at the top. If not, it might try to turn turtle on you when in the water. I agree about the noodles and the hole in the top.
Depending on the size of the GSH, they might beat their tails up on the mesh.
|
|
|
Moderated by Bill Cody, Bruce Condello, catmandoo, Chris Steelman, Dave Davidson1, esshup, ewest, FireIsHot, Omaha, Sunil, teehjaeh57
|
|