|
Forums36
Topics41,050
Posts558,882
Members18,557
| |
Most Online3,612
Jan 10th, 2023
|
|
|
8 members (FishinRod, Thirdy8special, Boondoggle, SSJSayajin, Sunil, Alligatorob, catscratch, Bgroamer),
976
guests, and
266
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
Joined: Feb 2003
Posts: 10
Fingerling
|
OP
Fingerling
Joined: Feb 2003
Posts: 10 |
I have been using Aquapro feeders for about 10 years. This year I switched from Gamefish to Aquamax 600. The fish love it but my feeders don't. The folks at BA Products said that the Aquapro is designed for feed up to 1/4 inch. Aqusmax runs from 1/4 to 5/16 inch. The feed just haingsup in the feeder and doesn't fall into the spinner. Is there a feeder that will handle the Aqusmax?
A second question about the bass food. I have noticed that at least five or six bass fo the 2.5 pound class are eating the Aquamax, so I have ordered the larger Bass food from my dealer. Should I throw a few out at one of the feeding times or what? Also if bass are eating the feed will they still prey on the bluegills?
Thanks,
Bill Marsh
|
|
|
|
|
Joined: Nov 2006
Posts: 236
Fingerling
|
|
Fingerling
Joined: Nov 2006
Posts: 236 |
Texas Hunter feeders handle the 600 with no problem.
|
|
|
|
|
Joined: Mar 2011
Posts: 621
|
|
Joined: Mar 2011
Posts: 621 |
If you remove the spinner mechanism, take a Dremel or similar tool and enlarge the hole that the feed falls through. I've done this on Moultrie feeders with good success.
Last edited by roadwarriorsvt; 07/10/12 02:42 PM.
|
|
|
Moderated by Bill Cody, Bruce Condello, catmandoo, Chris Steelman, Dave Davidson1, esshup, ewest, FireIsHot, Omaha, Sunil, teehjaeh57 |
|
