|
Forums36
Topics41,054
Posts558,928
Members18,560
| |
Most Online3,612
Jan 10th, 2023
|
|
|
|
Joined: Aug 2005
Posts: 177
Lunker
|
OP
Lunker
Joined: Aug 2005
Posts: 177 |
I'd like to aerate my ponds, and I'd like to use a windmill. However, the area where my ponds are located, was carved out of a ~60 year old forest, so surrouned by 60-100ft tall trees. I'm wondering if/where I could locate the windmill for best operation? See attached pic: Windmill Location
|
|
|
|
|
Joined: Jan 2009
Posts: 28,652 Likes: 878
Moderator Ambassador Field Correspondent  Lunker
|
Moderator Ambassador Field Correspondent Lunker
Joined: Jan 2009
Posts: 28,652 Likes: 878 |
When I looked into that for my pond, I was told to put the windmill higher than any trees. Since that wasn't an cost effective option, I went with electric. How tall are the trees on the island? I think placing it on the island would be your best bet, and getting it as high as possible. How big is the pond?
|
|
|
|
|
Joined: Aug 2005
Posts: 177
Lunker
|
|
OP
Lunker
Joined: Aug 2005
Posts: 177 |
Total surface area of the ponds is 1.3 acres.
The tree on the island is about 60+ ft tall silver maple.
No way I'm getting a windmill taller than the surrounding trees...
|
|
|
|
|
Joined: Apr 2002
Posts: 15,167 Likes: 496
Moderator
Ambassador
Field Correspondent Lunker
|
|
Moderator
Ambassador
Field Correspondent Lunker
Joined: Apr 2002
Posts: 15,167 Likes: 496 |
The problem for aerating a pond with an island is getting the water currents to the back sides of the island. Island acts as a baffle to circulation. One really needs a diffuser on each side of the island. Windmills and trees do not go well together and are a poor combination for obvious reasons.
aka Pond Doctor & Dr. Perca Read Pond Boss Magazine -
America's Journal of Pond Management
|
|
|
Moderated by Bill Cody, Bruce Condello, catmandoo, Chris Steelman, Dave Davidson1, esshup, ewest, FireIsHot, Omaha, Sunil, teehjaeh57 |
|
