Forums36
Topics41,062
Posts559,066
Members18,564
|
Most Online3,612 Jan 10th, 2023
|
|
15 members (Theeck, Fishingadventure, Boondoggle, John Kruid, ArkieJig, Tinylake, catscratch, tim k, 4CornersPuddle, Rick O, Sunil, Bigtrh24, JoeDK, rjackson, Knobber),
572
guests, and
449
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
Joined: Feb 2006
Posts: 210
Lunker
|
Lunker
Joined: Feb 2006
Posts: 210 |
Nitrate+Nitrate Nitrogren - Not Detected Flouride - .49 mg/l ph at 22.0 Celsius - 7.8 (slightly alaline but in range with well Water Turbidity - 1.0 NTU (expect ground water to be low TSS) Total Dissolved Solids - 483 mg/l (this is the measure of TDS) Hardness [CaCO3] - 340 mg/l (total calcium and magnesium) Hardness [CaCO3] - 20 grains/gal(17.1 ppm per Grain) Electrical Conductivity - 0.754 mmho/cm (probably 754 mhos) Sulfate [SO4] - 30 mg/l (typical) Total Calcium - 88 mg/l (multiply by 2.5 to get as CaCO3) Total Iron - not detected (good) Total Magnesium - 0.67 mg/l (multiply by 4.12 to get as CacO3) Total Sodium - 36 mg/ Typical)
This apears to be typical ground water, high in hardness and probably alkalinity. With low sodium, the hardness will likely be associated with alkalinity and your total bicarbonate alakalinity will be approximately equal to hardness as CaCO3.
Mike
|
|
|
Moderated by Bill Cody, Bruce Condello, catmandoo, Chris Steelman, Dave Davidson1, esshup, ewest, FireIsHot, Omaha, Sunil, teehjaeh57
|
|