Forums36
Topics41,060
Posts559,028
Members18,564
|
Most Online3,612 Jan 10th, 2023
|
|
11 members (BJ Nick, Augie, Shorthose, Justin W, Theo Gallus, Retired on 40, robc, Levon Sargent, catscratch, Trsshup, Boondoggle),
752
guests, and
398
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
Joined: May 2009
Posts: 5,730 Likes: 289
Lunker
|
OP
Lunker
Joined: May 2009
Posts: 5,730 Likes: 289 |
Theo,
Thanks for the inerest. I am on dial-up so pictures are a bit tough. I had thought about adding an elbow (don't need a riser cause I'll get more that 18 inches with just the elbow). I am worried that without the bevel on the 15-inch pipe that the elbow won't slide on. I have never worked with PVC pipe this large. I also was worried that with the openning facing up, that the outlet might pull too much air during flooding (whorlpool effect), causing the drain to carry less water and putting too much flow through the emergency spillway. I was hoping that somebody made something specific for this like a plastic box that fit over the pipe. Any suggestions on how to locate local suppier for the elbows?
|
|
|
Moderated by Bill Cody, Bruce Condello, catmandoo, Chris Steelman, Dave Davidson1, esshup, ewest, FireIsHot, Omaha, Sunil, teehjaeh57
|
|